MiningWeekly.com Audio Articles podcast

South Africa’s Rietberg copper mine revival reaches main ore zone

0:00
5:40
Reculer de 15 secondes
Avancer de 15 secondes
This audio is brought to you by Endress and Hauser, a global leader in process and laboratory measurement technology, offering a broad portfolio of instruments, solutions and services for industrial process measurement and automation.
The development of the Rietberg copper mine in South Africa's endowed Northern Cape has reaches main ore zone with initial bulk sampling supporting mine plan grade, Copper 360 reported on Monday, November 16.
"After reaching the 300 Level elevation, we kept developing towards the main ore zone, and this week we intersected it," Copper 360 CEO Gordon Thompson stated in a Johannesburg Stock Exchange news service (SENS) notice sourced by Mining Weekly.
On October 15 Copper 360 reported that the incline at the Rietberg underground mine had intersected copper sulphide mineralisation ahead of the known Upper orebody.
After reaching the 300 Level elevation, development continued towards the main ore zone.
"We've now advanced nine metres within the mafic and ultramafic zone, and the first bulk sample indicates that the 1.33% copper grade in our model is realistic. The ore grade we calculate from the sample is higher than the model grade, which gives us confidence in our forecast.
"These are initial results. Only after a few months of mining will we have a representative picture of the grades. Even so, with the footwall waste dilution taken into account, what we have seen so far is very encouraging," Thompson pointed out while thanking Rietberg development crews, geologists, engineers and support staff," Thompson added .
Bulk sampling indicates a grade of about 1.9% total copper for the ore mined to date, once the footwall waste and low-grade material mined with it are taken into account. This compares with the grade of 1.33% copper in the mine plan. These are first results from a small tonnage and should be read with the cautionary note below.
The ore enters the excavation from the hanging wall, so the first blasts were only partly in ore. The ore made up between about one third and one half of the face, with footwall waste making up the balance. The proportion of ore in the face is expected to increase with each blast as the breakaway advances.
A total of 671.5 t of material from the breakaway processed through the crusher consisted of an estimated 143.7 t of ore, 202.6 t of footwall waste and 325.2 t of low-grade material from the breakaway.
Six samples taken at the crusher returned grades of between 0.25% and 0.75% Cu, averaging 0.50% Cu for the diluted material. Grade is estimated at 1.9% copper, within a range of 1.3% to 2.3% copper.
Five samples of exposed ore taken at the face and from the stockpile, without dilution, were analysed by X-ray fluorescence and returned grades of between 1.80% and 3.23% copper, averaging 2.31% copper. The two nearest historical boreholes, RB239 and RB240, have weighted average sample grades of 1.35% and 1.66% copper respectively.
X-ray fluorescence results in mineral exploration provide rapid, non-destructive elemental and oxide analysis of rocks, soils, drill cores, and cuttings. Using portable or handheld X-ray fluorescence devices, field teams obtain immediate geochemical data rather than waiting weeks or months for traditional laboratory assays.
These are initial results from the first metres of development in the ore zone. The ore grade is a back-calculation that depends on the estimated tonnes of ore, footwall waste and low-grade material in the crushed parcel, and the material as crushed averaged 0.50% Cu because of that dilution. The X-ray fluorescence results on exposed ore are indicative and are not laboratory assays.
A representative view of the grade will only be available after a few months of mining, when production can be reconciled against the geological model. The results do not change the Copper 360s mineral resource or mineral reserve estimates.
The results do not change the mine plan. Development will continue at the recommended 9° incline, and ...

D'autres épisodes de "MiningWeekly.com Audio Articles"