Ask the A&Ps podcast

"Can I make the engine blow less oil?"

17.11.2026
0:00
1:06:00
15 Sekunden vorwärts
15 Sekunden vorwärts
Owner-produced parts, manuals, blow by and more. Send your questions to [email protected] for a chance to get on the show. Join the world's largest aviation community at aopa.org/join Full episode notes below: Daniel wonders whether it's possible to make your own parts. The hosts explain that the standard is that owner-produced parts must be at least as good as the original, meaning they can be even better. To achieve that standard they recommend going to a machine shop or good mechanic who can reverse engineer it. Paul said Textron is really good about sharing information, and sometimes even basic drawings, especially if they no longer produce the part. Key to this is that the mechanic must be ok with it, and supportive. Mike further points out that a minor alteration only needs acceptable data, while a major repair requires approved data. Given that this is a minor repair, Daniel can even use acceptable data or methods. Jerry is an IA who is wondering how to deal with manuals. This is a challenge, Paul says. If it's an airplane he works on often, Paul suggests buying the manuals and baking that into the labor rate. For one-off airplanes, he recommends passing that cost on to the customer directly. Mike said he thinks it's a good idea that owners buy their own manuals anyway, especially because that enables them to work with a variety of different shops, including while they are on the road. Kevin said he's having trouble finding an aircraft lender that is willing to work with a run-out engine. The hosts are surprised by this, given the benefit to the new owner. If they do fund this type of arrangement, Kevin said they typically will lend the amount for the aircraft plus the overhaul and keep the money in escrow until the engine is overhauled. Ethan has a Mooney 231 with a TSIO-360 and he said it's constantly covered with oil and the mechanic thinks there's blow by and he's wondering what to do. His mechanic did a test that can determine the speed of the air through the crankcase, and his was in the hundreds. The top limit for the test is about 90 miles per hour. The first thing the hosts would do is a solvent flush to make sure the rings aren't stuck. But he's only using a quart every 8 hours, which isn't much. If Ethan is worried about whether his breather tube is clogged, Colleen said he can simply blow into the oil filler tube and if the air comes back at him, it's blocked.

Weitere Episoden von „Ask the A&Ps“