Changing the Apprenticeship model in Plumbing and Heating for the Future Homes Standard

Send a textThis episode discusses in lay terms the Position Paper which you can find on the betateach website and you can also download hereI speak to lots of Engineers who have apprentices at college who are not happy with the college system. The Betateach Position Paper argues for testing a new way of doing things. Support the showLearn more about heat pump heating by followingNathan on Linkedin, Twitter and BlueSky

Send a textIn this episode of BetaTalk, Nathan welcomes back engineer and coder James Twallin to discuss the technical nuances of the UK’s energy transition. While industry debates are often binary, this conversation focuses on objective data regarding gas infrastructure, the physics of high mass heritage buildings, and the importance of real world boiler monitoring for hydronic heat pump success.Key Topics Discussed:The "Invisible" Gas Leak Problem: James reveals his research into the UK’s gas network. He explains how current energy policy and EPC ratings often ignore upstream methane leaks. Using Freedom of Information data, he highlights the prevalence of leaks in ancient cast iron mains featuring 19th century archaeological engineering.Decarbonising Heritage Buildings: A deep dive into a 200 year old stone church project. James explains why steady state modelling fails in these environments and how a physics based approach allowed for a successful, intermittent air to air heat pump installation by leveraging the building’s thermal mass.Optimising Hydronic Transitions: Nathan and James discuss a new monitoring device designed to track existing boiler behaviour. By gathering data on flow temperatures and cycling, engineers can create a more accurate blueprint for future heat pump performance.Technical Correction During the recording, a Bosch study involving 4,000 units was discussed. While mentioned as a heat pump survey in the audio, Nathan would like to clarify that the study actually monitored 4,000 gas boilers. Thanks to the Patrons of the Guild of Master Heat Engineers who help make these podcasts possible Support the showLearn more about heat pump heating by followingNathan on Linkedin, Twitter and BlueSky

Send a textPrimary Expert: Mick Wall (IT Specialist, University of Sheffield & Founder of Energy Stats UK)Host: Nathan Gambling (Beta Talk Podcast and Betateach Newsletter)Core Topics: Heat Loss Accuracy, Weather Compensation vs. Room Influence, Smart Tariffs (Octopus Energy).Executive Summary (TL;DR)Standard MCS heat loss calculations often overestimate ventilation losses in older homes by up to 300%. Expert consumer Mick Wall demonstrates that real-world air changes in a 1930s semi-detached house are closer to 0.5 ACH (Air Changes per Hour) rather than the CIBSE default of 1.5–3.0 ACH. This episode explores how to verify heat loss using Pulse Tests and CO2 Decay to prevent heat pump oversizing.1. Challenging MCS Heat Loss DefaultsStandard industry calculations often rely on static building guides that fail to account for the actual "tightness" of 20th-century builds.The Problem: Default values from CIBSE and MCS result in oversized heat pumps, leading to short-cycling and reduced efficiency. The Evidence: Mick Wall utilises three distinct methodologies to validate air change rates: Pressure Testing: Utilising the Build Test Solutions Pulse kit for rapid air evacuation measurement. CO2 Decay Monitoring: Deploying Purrmetrix sensors to track gas dissipation over 7 days. Reverse Modeling: Matching 4 years of Open Energy Monitor data against Spruce fabric loss models. 2. Comfort Dynamics: Weather Compensation vs. Room InfluenceWhile "pure" weather compensation (adjusting flow temperature based on outdoor air) is better than on/off control, it often lacks the "aggression" needed for rapid recovery.Pure Weather Comp: Best for steady-state efficiency but may fail during sudden internal temperature drops. Room Influence: Wall advocates for this approach and currently uses his Vaillant control with Havenwise which is an optimiser. Key Takeaway: Insulation (e.g., bay window upgrades) provides "unmeasurable comfort" by eliminating drafts, even when the fabric watt-saving is minimal. 3. Optimising the "Elephant in the Room": Smart TariffsA high-quality heat pump installation must perform efficiently regardless of the tariff. However, leveraging the Octopus Energy Kraken platform provides significant cost advantages.Agile vs. Cozy Tariffs: Understanding how to shift loads without sacrificing comfort. The Risk: Relying on cheap overnight electricity to "mask" a poorly designed, low-efficiency system. Support the showLearn more about heat pump heating by followingNathan on Linkedin, Twitter and BlueSky

Send a textIn this episode, Nathan sits down with economist Ben Watts, the creator of the real-time energy dashboard at kilowatts.io. They explore the hidden "engine room" of the UK’s electricity system, the high-stakes market where power is traded in 30-minute blocks. Ben explains why a single line on the map (the B6 Boundary) is costing consumers over £1 billion a year and how technology like heat pumps and EVs are moving from being "loads" to "assets" that help keep the grid balanced.Key Jargon Buster: The Grid BoundariesTo help listeners follow the conversation, here is a quick guide to the "pinch points" Ben mentions:B6 Boundary: The most critical bottleneck in the UK. It runs along the Scottish-English border.B4 Boundary: A northern bottleneck separating the Scottish Highlands from the Central Belt.The "4.5 GW" Limit: The onshore overhead cables at B6 can securely handle about 4.5 GW. When combined with the Western HVDC subsea link (2.2 GW), the total limit is roughly 6.7 GW.Wind Curtailment: When there is more wind in Scotland than the B6 "pipes" can carry, NESO pays wind farms to stop generating while paying gas plants in the South to turn on.Keywords & Themeskilowatts.io: Ben’s dashboard for visualising real-time grid data.NESO: The National Energy System Operator (the new name for the system operator in 2026).CCGT Maintenance: Why demineralised water is essential for the steam turbines in gas power plants.Flexibility Assets: Using heat pumps as "virtual power plants" to respond to grid signals at 50Hz.Support the showLearn more about heat pump heating by followingNathan on Linkedin, Twitter and BlueSky

Send a textIn this episode of BetaTalk, I talk about a subject I am deeply passionate about marketing within the UK heating sector.The UK has the most competitive heating market in Europe, with the highest boiler sales across the continent. In such a competitive environment, marketing plays an essential role. I reflect on how, at times, marketing messages can move away from fundamental heating science. This is not about blame or intent, but about acknowledging how commercial pressure and fast-moving narratives can influence communication.As scrutiny of the sector continues to increase from regulators, consumer bodies, and groups examining greenwashing, these gaps are becoming more noticeable. I talk about how this scrutiny is shaping conversations across the industry, including within marketing teams and trade bodies, where there can be tension between commercial expectations and technical accuracy.I also share why I speak about my grandfather so often on this podcast, and how his influence shaped my views on engineering, responsibility, and honesty in how we communicate technical information.This episode is a reflective discussion about marketing, science, and integrity, and how the heating industry can continue to communicate with clarity in an increasingly examined environment.Support the showLearn more about heat pump heating by followingNathan on Linkedin, Twitter and BlueSky

Send a textBetaTalk Podcast Show Notes: Air-to-Air Heat Pump Pioneering with John In this landmark episode of BetaTalk, the host sits down with John Ewbank to discuss his pioneering and invaluable research into the domestic application of Air-to-Air Heat Pumps (A2A HPs).This conversation marks a potentially historical inflection point for the UK heating sector, as Ewbank’s practical, data-driven work pushes the boundaries of efficient home heating. 🔬 The Pioneers of UK HeatingThe episode highlights a crucial lineage of highly skilled, 'geeky' homeowners and engineers who have collectively advanced the understanding and adoption of low-carbon domestic heating in the UK. Ewbank’s work stands alongside the incredible efforts of figures such as:Mick WallJohn CantorTrystan LeeGlyn HudsonThese individuals have performed & shared ground-breaking real-world research, often filling gaps left by industry. 💡 Collaboration with NestaA significant element of the discussion is John Ewbank's collaboration with Nesta, the UK's innovation foundation and think tank.The host expresses great satisfaction that Nesta is engaging directly with practitioners and heating engineers like Ewbank. Their approach is highlighted as being uniquely effective among Third Sector entities in actively supporting and utilizing the crucial data generated by this community of independent researchers.This is a vital episode for anyone interested in heat pumps, energy efficiency, and the future of UK home heating. Dive into the conversation, share it widely, and join the discussion around this incredible, pioneering work!https://www.youtube.com/@TimAndKatsGreenWalk Have Toshiba Haori set up -  Does interesting experiments.https://x.com/timothymortimer Daikin Stylish installed very happyhttps://x.com/jimmybb - Daikin Stylish installed very happyhttps://www.youtube.com/@EVPuzzle has many videos on his air to air systemhttps://www.youtube.com/@MrEV - other perspective installed has mixed feelings, but thinks was system design. Units were not optimally placed or sized My initial install & experiencehttps://johnewbank.co.uk/what-is-the-cheapest-way-to-heat-your-home/My experience when I lived with it for a bit.https://johnewbank.co.uk/living-with-an-air-to-air-heat-pump-installation-and-testing-notes/COP calculations https://johnewbank.co.uk/airtoairmonitoring/Guild Patrons PrimaryPro CastRads UK Radiators Renewables CentreSupport the showLearn more about heat pump heating by followingNathan on Linkedin, Twitter and BlueSky

Send a textThis week on BetaTalk, we're doing something truly special: the FIRST EVER exclusive interview with EDF Heat Pumps about their groundbreaking new "Express" initiative.EDF's new "Express" initiative is hitting the accelerator, promising faster, smoother heat pump deployments that are directly comparable to the cost of a boiler install. We sit down with Clay Brown from EDF Heat Pumps behind to unpack:What "Express" really means for installers and homeowners.How they're streamlining the process from survey to switch-on.The vision behind this bold step for #RenewableEnergy.Sign up to the BetaTeach newsletter to view heat pump installations from engineers in the Guild of Master Heat EngineersGUILD PATRONS:Primary ProWolseley Renewables CentreCastradsUK RadiatorsSupport the showLearn more about heat pump heating by followingNathan on Linkedin, Twitter and BlueSky

Send a textIn this episode Nathan chats to two of the Guild Patrons, Rob Nezard from UK Radiators and Nick Baylis from Castrads about the issue of radiators being sold in the UK with overstated power outputs. Rob and Nick have been working with the Manufacturers Association of Radiators and Convectors (MARC) and now have the help of the Government body:  Office for Product Safety and Standards (OPSS), the National Regulator for construction products, enforcing the Construction Product Regulations. This level of government involvement is a significant development, and it validates the nearly nine-year campaign for transparency and accurate performance claims across the radiator and convector sectorMeet the Guild PatronsGuild Patrons help support the Guild of Master Heat Engineers disseminate quality information about current good practice. Sign up to the Newsletter to see case studies from the MastersGuild Patrons are:Primary ProRenewable CentreCastradsUK Radiators Support the showLearn more about heat pump heating by followingNathan on Linkedin, Twitter and BlueSky

Send a textWelcome back to the BetaTalk podcast! I'm thrilled to be joined by Adam Chapman of Heat Geek for a deep dive into the buzz-generating Zero Disrupt initiative. In this episode, Adam shares the full story behind this new heat pump installation program, explaining how it aims to solve critical industry challenges, including improving affordability for consumers and giving homeowners greater choice on system efficiency. If you're keen to understand the strategy and hear what this bold move means for the evolving industry, this is a must-listen episode. Support the showLearn more about heat pump heating by followingNathan on Linkedin, Twitter and BlueSky

Send a textThis episode of Betatalk features a detailed examination of a bespoke heat pump heating system designed by engineers within the Guild of Master Heat Engineers. We speak with Mark Denman of Custom Renewables and Alex Hilton, the homeowner and a wonderful guest who provides valuable insight into sustainability.The engineers are leading heat geeks in the field, and this installation served as an excellent peer-to-peer learning opportunity for the community.We also dedicate time to discussing Zero Disrupt, a new initiative from Heat Geek.This heat pump podcast episode discusses the first case study on the BetaTeach website. Please click the Betateach link to view images and comprehensive details about the installation.BetaTeach.co.ukSupport the showLearn more about heat pump heating by followingNathan on Linkedin, Twitter and BlueSky