Ep. 159 - The One Where They Palletize Themselves

This week, with Zac MIA, we are joined by guest Keith Johnson for Episode 172 of "Off The Cut"! This week, Eric continues his grievances with the Shaper Origin's finicky tape and its inability to cut perfectly straight lines. As well as his own planer woes, noting inconsistent feeding on the left side.The discussion shifts to the challenges of installing inset drawer fronts and a preference for Soliche drawer slides over Blum. We also delve into contractor quality and the frustrations of home renovations, highlighting issues like poor trim work and unpainted balusters. Keith explains his decision to drop his contractor's license due to new bond requirements. Do Woodworkers make the worst customers?Got a question that you want us to answer? Send us an email at ⁠[email protected] ⁠Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠⁠https://streamyard.com/pal/c/5926541443858432 ⁠⁠ ⁠-------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠⁠⁠https://www.patreon.com/offthecutpodcast ⁠⁠⁠-------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠⁠ -------------------------Pick Up Some Merch!Windbreaker - ⁠⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠⁠ -------------------------Follow ZacInstagram - ⁠⁠⁠⁠https://www.instagram.com/zacbuilds ⁠⁠⁠⁠YouTube - ⁠⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠⁠ -------------------------Follow EricInstagram - ⁠⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠⁠ YouTube - ⁠⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠⁠ TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠  ⁠-------------------------Follow Deric⁠⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠⁠ ---------------------------Shoutout to:KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠kmtools.com/SPENCLEYDESIGNCOAnd WTB Woodworking, our newest sponsor! Check out the giveaway over here:https://www.wtbwoodworking.com/giveaway#Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

We pull back the curtain on video editing, including how we "fake it till we make it" with B-roll. We're geeking out over 3D printer filaments, especially glass-filled ABS, is it our new favorite (even if it still stinks!)? Then, things get real in the shop with a painting disaster that left Deric’s garage floor and door looking a little emo. We brainstorm ways to clean it up, including some heavy-duty razor blades and paint stripper. We get handy with outdoor power tools that have interchangeable heads – total game-changers for yard work. What is the cost of perfection? How to navigate tricky client expectations. And finally, we give a sneak peek at upcoming videos, including a PlayStation 5 mod. We spill the tea on how to handle sponsored content without annoying you (it's all about that natural flow!). Plus, a quick shout-out to our new favorite tool: the ultrasonic cleaner – even if it makes a terrible noise.Got a question that you want us to answer? Send us an email at ⁠[email protected] ⁠Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠⁠https://streamyard.com/pal/c/5926541443858432 ⁠⁠ ⁠-------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠⁠⁠https://www.patreon.com/offthecutpodcast ⁠⁠⁠-------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠⁠ -------------------------Pick Up Some Merch!Windbreaker - ⁠⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠⁠ -------------------------Follow ZacInstagram - ⁠⁠⁠⁠https://www.instagram.com/zacbuilds ⁠⁠⁠⁠YouTube - ⁠⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠⁠ -------------------------Follow EricInstagram - ⁠⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠⁠ YouTube - ⁠⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠⁠ TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠  ⁠-------------------------Follow Deric⁠⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠⁠ ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠⁠⁠kmtools.com/SPENCLEYDESIGNCO ⁠⁠#Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

What fuels our creative fire? This week, Zac and Eric explore motivation and the creator mindset, sharing what drives them to take on new projects and document the journey. You may even get an early look (or listen) at their upcoming work! No aftershow this week, we held our monthly BYOC. Join the top tier over on Patreon and get in on next month's live BYOC hangout with us!Join us for conversations about woodworking, 3D printing, DIY and cross country travel. Got a question that you want us to answer? Send us an email at ⁠[email protected]⁠ Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠https://streamyard.com/pal/c/5926541443858432⁠⁠ -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠https://www.patreon.com/offthecutpodcast⁠ ⁠ -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠ -------------------------Pick Up Some Merch!Windbreaker - ⁠⁠https://www.spencleydesignco.com ⁠⁠ -------------------------Follow ZacInstagram - ⁠⁠https://www.instagram.com/zacbuilds⁠⁠ YouTube - ⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠ TikTok - ⁠⁠https://www.tiktok.com/@zacbuilds⁠ ⁠ -------------------------Follow EricInstagram - ⁠⁠https://www.instagram.com/spencleydesignco⁠⁠ YouTube - ⁠⁠https://youtube.com/@spencleydesignco⁠ ⁠ TikTok - ⁠⁠https://www.tiktok.com/@spencleydesignco⁠ ⁠ -------------------------Follow Deric⁠⁠https://linktr.ee/pecantreedesign⁠⁠ ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠kmtools.com/SPENCLEYDESIGNCO⁠ #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

Where's the best place to buy tools? The guys go head-to-head this week, comparing big box stores (Home Depot, Lowes), traditional hardware stores (Ace, TrueValue), and discount importers (Harbor Freight, Princess Auto). Expect strong opinions and maybe even a few disagreements! We'll also catch up on our shop projects and the joys (and frustrations) of being content creators.Join us for conversations about woodworking, 3D printing, DIY and cross country travel. Got a question that you want us to answer? Send us an email at ⁠[email protected]⁠ Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠https://streamyard.com/pal/c/5926541443858432⁠⁠ -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠https://www.patreon.com/offthecutpodcast⁠ ⁠ -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠ -------------------------Pick Up Some Merch!Windbreaker - ⁠⁠https://www.spencleydesignco.com⁠⁠ -------------------------Follow ZacInstagram - ⁠⁠https://www.instagram.com/zacbuilds⁠⁠ YouTube - ⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠ TikTok - ⁠⁠https://www.tiktok.com/@zacbuilds⁠ ⁠ -------------------------Follow EricInstagram - ⁠⁠https://www.instagram.com/spencleydesignco⁠⁠ YouTube - ⁠⁠https://youtube.com/@spencleydesignco⁠ ⁠ TikTok - ⁠⁠https://www.tiktok.com/@spencleydesignco⁠ ⁠ -------------------------Follow Deric⁠⁠https://linktr.ee/pecantreedesign⁠⁠ ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠kmtools.com/SPENCLEYDESIGNCO⁠ #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

Eric is back! We catch up with Eric and hear all about his adventures in the American Southwest, and a new feud with a certain airline, should we just drive everywhere now? We discuss the new Katz-Moses Cleat System and drool over the new shop organization offered by our sponsor in this not sponsored tangent. Get the low down on Zac’s latest project, is there a Nintendo product left for him to modify? And, we discuss some tips for finding money in old books when Deric discusses his latest trip North(did Deric and Eric cross paths?). Join us for conversations about woodworking, 3D printing, DIY and cross country travel. Got a question that you want us to answer?  Send us an email at ⁠[email protected]⁠ Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard:  ⁠⁠https://streamyard.com/pal/c/5926541443858432⁠⁠ -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠https://www.patreon.com/offthecutpodcast⁠ ⁠ -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠  -------------------------Pick Up Some Merch!Windbreaker - ⁠⁠https://www.spencleydesignco.com⁠⁠  -------------------------Follow ZacInstagram - ⁠⁠https://www.instagram.com/zacbuilds⁠⁠  YouTube - ⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠   TikTok - ⁠⁠https://www.tiktok.com/@zacbuilds⁠ ⁠ -------------------------Follow EricInstagram - ⁠⁠https://www.instagram.com/spencleydesignco⁠⁠  YouTube - ⁠⁠https://youtube.com/@spencleydesignco⁠ ⁠ TikTok - ⁠⁠https://www.tiktok.com/@spencleydesignco⁠ ⁠ -------------------------Follow Deric⁠⁠https://linktr.ee/pecantreedesign⁠⁠  ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com (⁠⁠kmtools.com/SPENCLEYDESIGNCO⁠ ⁠⁠) #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

While Eric tries not to get lost in the American southwest, Zac and Deric continue on with a new episode. We take the opportunity to discuss the ins and outs of being a content creator in today’s ever changing landscape. While exploring the pros and cons of short-form versus long-form content, effective strategies for growing an audience, and the challenges of navigating brand partnerships. What exactly is the long-term viability of content creation as a career? How important is an "Exit Strategy"? Whether you're an aspiring creator or simply interested in the world of online content, we try and bring our personal insight for you this and every week.Get access to Eric’s course with the exclusive Off The Cut discount, use code OTC25 at checkout: https://spencleydesignco.com/collections/courses/products/shaker-style-cabinet-door-and-drawer-front-course Join us LIVE for conversations about woodworking, 3D printing, DIY and tax evasion. Got a question that you want us to answer? Send us an email at ⁠[email protected]⁠ Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠https://streamyard.com/pal/c/5926541443858432⁠ -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠https://www.patreon.com/offthecutpodcast⁠ -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠ -------------------------Pick Up Some Merch!Windbreaker - ⁠https://www.spencleydesignco.com⁠ -------------------------Follow ZacInstagram - ⁠https://www.instagram.com/zacbuilds⁠ YouTube - ⁠https://www.youtube.com/c/@ZacBuilds⁠ TikTok - ⁠https://www.tiktok.com/@zacbuilds⁠ -------------------------Follow EricInstagram - ⁠https://www.instagram.com/spencleydesignco⁠ YouTube - ⁠https://youtube.com/@SpencleyDesignCo TikTok - ⁠https://www.tiktok.com/@spencleydesignco⁠ -------------------------Follow Deric⁠https://linktr.ee/pecantreedesign⁠ ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com (⁠kmtools.com/SPENCLEYDESIGNCO⁠)

The guys are back and doing slightly better than last week. Join them as they discuss Zac’s big outdoor patio project with Mark Rayson and MicroPro Sienna, Eric’s new online course, Burnout when the finish line is in sight, and the ever-evolving world of online platforms like Spotify and YouTube.In this episode:Sienna Squad Project: Get the details on Zac’s upcoming three-day project with Mark Rayson and MicroPro Sienna to rebuild a restaurant's outdoor patio, working with high school students and focusing on the construction process.  Designer vs. Builder: A discussion on the challenges of working with designers who prioritize aesthetics over feasibility and managing client expectations.  Spotify's Video Push: We explore Spotify's efforts to compete with YouTube in the video space and how creators are porting their content.  YouTube Algorithm & Video Performance: Insights into how YouTube pushes videos, the importance of the initial hours for viewership, and how content performs over time. Launching an Online Course: Eric talks about launching his first woodworking course on making shaker style doors and drawer fronts, the technical hurdles faced, and the positive feedback received. Plus, get a discount code for the course!  The Creative Process & Project Fatigue: The struggle of finishing projects when the exciting engineering phase is over and the importance of crafting compelling video narratives, even if it means reshooting.  The Value of Reviews: A conversation about the role of online reviews in purchasing decisions and how to discern genuine feedback.  Get access to Eric’s course with the exclusive Off The Cut discount, use code OTC25 at checkout: https://spencleydesignco.com/collections/courses/products/shaker-style-cabinet-door-and-drawer-front-course Got a question that you want us to answer?  Send us an email at ⁠[email protected]⁠ Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard:  ⁠https://streamyard.com/pal/c/5926541443858432⁠ -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠https://www.patreon.com/offthecutpodcast ⁠ -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠  -------------------------Pick Up Some Merch!Windbreaker - ⁠https://www.spencleydesignco.com⁠  -------------------------Follow ZacInstagram - ⁠https://www.instagram.com/zacbuilds⁠  YouTube - ⁠https://www.youtube.com/c/@ZacBuilds⁠   TikTok - ⁠https://www.tiktok.com/@zacbuilds ⁠ -------------------------Follow EricInstagram - ⁠https://www.instagram.com/spencleydesignco⁠  YouTube - ⁠https://youtube.com/@spencleydesignco ⁠ TikTok - ⁠https://www.tiktok.com/@spencleydesignco ⁠ -------------------------Follow Deric⁠https://linktr.ee/pecantreedesign⁠  ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com (⁠kmtools.com/SPENCLEYDESIGNCO ⁠ (http://kmtools.com/SPENCLEYDESIGNCO) )

Join the guys this week as they dive into a variety of topics, from 3D printing products on demand and the struggles of tax season to eye infections and the challenges of being a content creator.In this episode:Tax Day & Podcast Finances: Can you believe Zac still hasn’t filed his taxes? .   Eye 2 Eye: Hear about a mysterious viral eye infection and the challenges of recording video with limited vision.   Content Creation Mindset Shift: A deep dive into the evolution of their YouTube strategies, balancing sponsorships with creating their own products and courses.   New Projects & Product Design: Get a sneak peek at Zac's upcoming video project involving cooling a computer with a fan, and Eric's experience designing and prototyping 3D printed battery holders, including a surprising challenge with battery tolerances.   3D Printing Insights: Discussions on recycling 3D prints, affordable filament options, and a clever hack for using non-bamboo filament with Bambu Lab printers.   YouTube Recognition & Funny Encounters: Stories of being recognized in public (and on Facebook Marketplace!), and the surprising discovery of Eric's vocal doppelganger.   Got a question that you want us to answer?  Send us an email at ⁠[email protected]⁠ Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard:  ⁠https://streamyard.com/pal/c/5926541443858432⁠   -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠https://www.patreon.com/offthecutpodcast⁠ -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠ -------------------------Pick Up Some Merch!Windbreaker - ⁠https://www.spencleydesignco.com⁠ -------------------------Follow ZacInstagram - ⁠https://www.instagram.com/zacbuilds⁠ YouTube - ⁠https://www.youtube.com/c/@ZacBuilds⁠  TikTok - ⁠https://www.tiktok.com/@zacbuilds⁠ -------------------------Follow EricInstagram - ⁠https://www.instagram.com/spencleydesignco⁠ YouTube - ⁠https://youtube.com/@spencleydesignco⁠ TikTok - ⁠https://www.tiktok.com/@spencleydesignco⁠ -------------------------Follow Deric⁠https://linktr.ee/pecantreedesign⁠ ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com (⁠kmtools.com/SPENCLEYDESIGNCO⁠)

Welcome back to Off The Cut! In this week's live episode, we kick things off with some of our signature pre-show banter. Then we attempt to put on a show about woodworking, making, and generally creating things for an audience.  Tune in as we discuss:Exciting Brand Partnerships: Zac teases an upcoming brand partnership that has Eric green with envy.  Cracker Conundrums: Wheat Thins to Veggie Thins, and the ultimate Chicken Biscuit debate.Jonathan's News & KM Tools: The latest from Jonathan at KM Tools, including a tease about his new French cleats. Plus, find out how you can win a $50 gift card to KM Tools by becoming a patron. Product Reviews: Eric shares his experience with N3 Nano ceramic finish on his dining table, sparking a discussion about ceramic coatings for woodworking. Car Talk: We debate the merits of high-trim vs. low-trim vehicles, must-have car features, and Zac's upcoming trip to Montreal for the Ford Maverick launch.  Freight Shipping Adventures: Learn about Zac's recent experience with freight shipping and we discuss some unique logistical vocabulary like LTL (less than truckload).Shopify Love: Zac raves about how easy Shopify makes running his online store.Exciting Sneak Peeks: Stay tuned for a hint about a potential game-changer in the tool worldGot a question that you want us to answer?  Send us an email at [email protected] Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard:  https://streamyard.com/pal/c/5926541443858432   -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!https://www.patreon.com/offthecutpodcast -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ -------------------------Pick Up Some Merch!Windbreaker - https://www.spencleydesignco.com -------------------------Follow ZacInstagram - https://www.instagram.com/zacbuilds YouTube - https://www.youtube.com/c/@ZacBuilds  TikTok - https://www.tiktok.com/@zacbuilds -------------------------Follow EricInstagram - https://www.instagram.com/spencleydesignco YouTube - https://youtube.com/@spencleydesignco TikTok - https://www.tiktok.com/@spencleydesignco -------------------------Follow Derichttps://linktr.ee/pecantreedesign ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com (kmtools.com/SPENCLEYDESIGNCO)

Unlock the aftershow and bonus show + tons of other cool perks!⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.patreon.com/offthecutpodcast⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠----------------QuestionsGot a question that you want us to answer? Send us an email at [email protected] Out with UsWatch the live stream of the podcast on YouTube!⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠----------------Follow ZacInstagram-⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.instagram.com/zacbuilds/⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠YouTube-⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.youtube.com/c/ZacBuilds⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠TikTok-⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠------Follow EricInstagram-⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.instagram.com/spencleydesignco/⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠YouTube-⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠ ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://youtube.com/spencleydesignco⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠TikTok-⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠ https://www.tiktok.com/@spencleydesignco⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠--------Follow DericInstagram-⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.instagram.com/pecantreedesign/⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠YouTube-⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.youtube.com/@pecantreedesign⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠TikTok-⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠https://www.tiktok.com/@pecantreedesign⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠--------Shoutout to KM Tools for sponsoring the show⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com⁠⁠⁠