
A clamp covered in mould may carry very little toxin, while feed that looks perfectly clean can carry a significant load. Mycotoxins are hard to see, hard to test for and easy to underestimate. Peter van der Vegt, Global Lead Technical Service at Volac International Limited, and Amanda Clements, Key Account Manager for Central England and Wales at Volac, joined Andrew and Sarah to explain what they are, where they come from and what they do to the dairy cow.
Amanda explained that moulds produce mycotoxins when they are under stress, and that Fusarium, probably the most common group in the UK, comes in from the field on the crop. With maize short after the drought, cutting low to make up the shortfall could bring more of it into the clamp. Peter shared findings from on-farm testing in the Netherlands, where concentrates carried higher levels of mycotoxins than the TMR/PMR, putting much of the risk outside the farmer’s control. He also explained why a clay binder will not deal with every toxin: aflatoxin binds easily, while DON, zearalenone, T-2 and HT-2 need to be transformed and degraded.
Amanda set out the symptoms to watch for, from loose manure and unexplained drops in milk to lower intakes and poor fertility, and why chronic, low-level exposure matters for high-producing cows already on a knife edge. Andrew described a herd whose milk fell off a cliff after a poorly filled maize clamp, and the practical reality of acting before test results come back. The conversation also covered feeding rates, sampling properly, feed bin hygiene and why a low-risk result is not the same as no risk.
This episode was recorded remotely in September 2026, and all information was correct at the time of recording. Please note this transcript was generated using AI transcription software. Despite best efforts to ensure accuracy, there may be some errors in the final piece.
Have you ever chased a herd problem you couldn’t pin down, only to find mycotoxins were behind it?
If you found this episode useful, please share it with someone who would benefit, subscribe so you never miss an episode, and leave us a review.
For more information about our podcast visit www.chewinthecud.com/podcast or follow us on Instagram @chewinthecudpodcast, or on Facebook and LinkedIn as ChewintheCud Ltd. You can also email us at [email protected].
More episodes from "ChewintheCud Podcast"



Don't miss an episode of “ChewintheCud Podcast” and subscribe to it in the GetPodcast app.








