The D-Code Podcast podcast

SMTAI 2026 - Gayle Towell

0:00
15:37
Manda indietro di 15 secondi
Manda avanti di 15 secondi

Ask any SMT engineer how to design a stencil aperture, and they will quote IPC-7525: keep your area ratio above 0.66, or maybe 0.60 if you are using a good nanocoating.

For years, that was treated as gospel.

Then boards got tighter. Stencil foils got shaved down to 3 mil and 2 mil to handle micro-BGAs and 01005s. Down on the production floor, operators and process engineers started noticing something infuriating:

A 0.60 area ratio that released clean as a whistle on a 4-mil or 5-mil foil was suddenly clinging inside the apertures and causing massive volume drop-offs on a 2-mil foil.

When people asked why, the industry basically shrugged and said: "That is just how thin foils behave."

When Gayle Towell of AIM Solder looked at the math, she realized the entire industry had overlooked something fundamental:

Gravity.

The classic area ratio formula balances two competing forces: paste adhesion to the board pad against paste adhesion to the aperture sidewalls. Both forces scale with surface area (2D).

What the formula completely ignores is the downward gravitational pull acting on the paste deposit. Gravity scales with volume (3D).

When you cut your stencil thickness in half, the volume and mass of paste inside that aperture drop through the floor. On a thick stencil, gravity acts as a silent assistant, physically helping pull that heavy paste brick out of the foil during separation. On an ultra-thin foil, that mass is gone. Gravity stops helping, and pad adhesion has to do all the heavy lifting alone.

That is why thin foils demand higher area ratios (often 0.70 or higher) just to get the same transfer efficiency.

Gayle joined Elias Malfavon Jr., Sean Kincaid, and Daniel Stanphill at our SMTA International 2026 booth to break down: • Why thin stencils lose their gravitational release assist • The massive empirical print study AIM is running across Type 4, Type 5, and Type 6 pastes to redefine real-world area ratio limits • What non-Newtonian rheology actually does to paste when the squeegee passes over and lifts • Sean's brilliant (and immediately debunked) idea to solve the problem by "making the flux heavier"

Altri episodi di "The D-Code Podcast"