The Founder's Foyer with Aishwarya Ashok podcast

#67 Electronics + AI 101: Building an $8 Game Console From Scratch | Sam Beek, AI Hardware at Schematik

0:00
41:25
Retroceder 15 segundos
Avanzar 15 segundos

Samuel Beek (founder of Schematik, ex-VEED) joins me to build a tiny platform game from scratch: an ESP32, a $2 OLED, two buttons and a breadboard. We type one plain-English prompt into Schematik, it picks the parts, draws the wiring and writes the firmware, and then we wire it up on camera and flash it over USB-C. If you have ever wanted to try electronics but felt you needed a degree, a soldering iron or a 3D printer, this one is for you. No soldering. No prior experience. About $8 in parts.WHAT'S INSIDE• The exact parts, and where to get them anywhere in the world• What a breadboard is, and which jumper wires to buy (all three kinds)• Wiring straight from the generated diagram, including what GND means• The USB-C cable mistake that stops most first boards from flashing• Firmware, compiling and flashing, in plain words• The moment the game appears on the display• Why retro monochrome displays look better than you think• Schematik vs Cursor and Claude Code for hardware: where coding tools stop• Four things to build next with the same board: a desk buddy, a live flight radar, a receipt printer that prints your morning briefing, a private video doorbellPARTS (all widely available)• ESP32 DevKit (breadboard version) ~$5• 0.96" SSD1306 OLED display ~$2• 2 tactile push buttons• Jumper wires, male-to-male (get M-M, M-F and F-F in one pack)• A breadboard• A USB-C cable that carries data, not charge-onlyGUESTSam Beek, Founder of Schematik — the AI hardware IDE that turns a plain-English prompt into parts, wiring and firmware.


Try it free: https://schematik.io


Instagram: https://instagram.com/schematikio


Follow The Founder’s Foyer

Website: https://www.thefoundersfoyer.com/epis

Instagram: @thefoundersfoyer

Spotify: https://open.spotify.com/show/7xov9ch

Apple podcast: https://podcasts.apple.com/in/podcast

Newsletter: https://aishwarya.substack.com/


CHAPTERS

00:00 Cold open: "I'm 100% sure stuff will go wrong"

00:22 Why we're building hardware on the show

02:01 The plan: a tiny platform game on an ESP32

02:44 Prompting Schematik and watching it wire the circuit

05:47 The parts: ESP32, OLED, buttons, jumper wires (about $8)

07:24 What a breadboard is (and why we both hate soldering)

09:49 Wiring the breadboard from the diagram

11:15 Jumper wires explained: buy all three kinds

14:53 What is GND? Learning by breaking things

17:33 "People think you're bringing some kind of explosive"

18:20 Connecting the board

19:24 The USB-C cable mistake everyone makes

20:28 Firmware, compiling and flashing, explained

22:36 It works! Reset, play, swap the buttons

24:31 Why retro displays beat the iPhone

25:59 Switching to a colour display in one prompt

27:32 You don't need a 3D printer (charity-shop parts)

28:40 The whole build costs about $831:10 Schematik vs Cursor and Claude Code for hardware

35:22 4 things to build next: desk buddy, flight radar, receipt printer, doorbell

37:15 The Schematik community page and Instagram

38:40 M5Stack and levelling up without a 3D printer

40:12 Wrap-up: don't get scared

Otros episodios de "The Founder's Foyer with Aishwarya Ashok"