Changing the Apprenticeship model in Plumbing and Heating for the Future Homes Standard

Send us Fan MailNathan chats to his friend Ricky from Thoroughflush about water quality in UK heating systems. Ricky leads the way in helping domestic heating engineers prevent corrosion in their boiler and heat pump wet heating systems. As well as discussing the VDI 2035 method of keeping heating systems clean they two chat about Ricky's own heat pump installation. It's a bit similar to Nesta's 'Start at Home' scheme. Support the showLearn more about heat pump heating by followingNathan on Linkedin, Twitter and BlueSky

Send us Fan MailThis episode of Betatalk features Will Rivers, associate director of residential decarbonisation at the Carbon Trust and Madeleine Gabriel, Sustainable Futures Mission Director at Nesta.We discuss the Department of Energy Security and Net Zero's funded Heat Pump Ready Programme which was part of the Net Zero Portfolio (NZIP) and ran from 2021-2025.The collaboration, evaluation and knowledge of this programme was managed by Carbon Trust who used the BetaTalk podcast to help share information. Heat Pump Ready 2 will start soon and Nathan's guests talk about the kind of innovation we might see.  Support the showLearn more about heat pump heating by followingNathan on Linkedin, Twitter and BlueSky

Send us Fan MailIn this episode of BetaTalk, Nathan sits down with industry veteran Graham Hendra to unpick the complexities and misconceptions currently stalling the UK’s heat pump rollout. While much of the national conversation is bogged down in rigid technical defaults and confusing marketing jargon, this discussion focuses on the practical realities of machine design, the untapped potential of air to air systems, and why the industry must change how it communicates with the general public.Key Discussion Points:The Engineering Reality at Haier Graham shares his journey from a refrigeration engineer to his current role at Haier, the major Chinese electronics manufacturer and a global leader in heat pump production. He discusses the unique challenge of building a better machine from the ground up, moving past the limitations of current units that simply are not good enough for the demands of the modern energy transition.Debunking the "Fridge in Reverse" Myth A deep dive into the industry’s communication problem. Both Nathan and Graham offer a clear rejection of the "fridge in reverse" analogy often used by journalists and salespeople. They argue it is a nonsensical description that confuses consumers. Instead, they frame a heat pump as a machine where the engineer is simply interested in the hot bit rather than the cold bit of the same refrigeration cycle.The Strategic Case for Air to Air Heat Pumps Drawing on Graham’s extensive background, there is a strong emphasis on air to air heat pumps as a secret weapon for decarbonisation. They explain why these systems are ideal for specific use cases, such as conservatories, bedrooms, or for families needing to heat a single room quickly and affordably, rather than forcing a one size fits all wet system on every property.Installation Nuance and Electrical Standards The conversation highlights the differences in installation quality and regulation. Graham contrasts a high end, quiet installation featuring hidden pipework against minimal budget options that compromise aesthetics. He also addresses the technical nuance behind why UK regulations require fixed appliances to be hardwired, adding cost and requiring a qualified electrician compared to simpler plug in models seen on the continent.Live at The Heat Pump Show, Newark A look ahead to The Heat Pump Show at Newark on April 22nd. Nathan will be hosting a panel featuring Graham, where they will dive deeper into the potential for air to air systems within national decarbonisation strategies and the specific sizing challenges that engineers face in the field.Thanks to the Patrons of the Guild of Master Heat Engineers who help make these podcasts possible. For more technical deep dives visit betateach.co.uk.Support the showLearn more about heat pump heating by followingNathan on Linkedin, Twitter and BlueSky

Send us Fan MailThis episode discusses in lay terms the Position Paper which you can find on the betateach website and you can also download hereI speak to lots of Engineers who have apprentices at college who are not happy with the college system. The Betateach Position Paper argues for testing a new way of doing things. Support the showLearn more about heat pump heating by followingNathan on Linkedin, Twitter and BlueSky

Send us Fan MailIn this episode of BetaTalk, Nathan welcomes back engineer and coder James Twallin to discuss the technical nuances of the UK’s energy transition. While industry debates are often binary, this conversation focuses on objective data regarding gas infrastructure, the physics of high mass heritage buildings, and the importance of real world boiler monitoring for hydronic heat pump success.Key Topics Discussed:The "Invisible" Gas Leak Problem: James reveals his research into the UK’s gas network. He explains how current energy policy and EPC ratings often ignore upstream methane leaks. Using Freedom of Information data, he highlights the prevalence of leaks in ancient cast iron mains featuring 19th century archaeological engineering.Decarbonising Heritage Buildings: A deep dive into a 200 year old stone church project. James explains why steady state modelling fails in these environments and how a physics based approach allowed for a successful, intermittent air to air heat pump installation by leveraging the building’s thermal mass.Optimising Hydronic Transitions: Nathan and James discuss a new monitoring device designed to track existing boiler behaviour. By gathering data on flow temperatures and cycling, engineers can create a more accurate blueprint for future heat pump performance.Technical Correction During the recording, a Bosch study involving 4,000 units was discussed. While mentioned as a heat pump survey in the audio, Nathan would like to clarify that the study actually monitored 4,000 gas boilers. Thanks to the Patrons of the Guild of Master Heat Engineers who help make these podcasts possible Support the showLearn more about heat pump heating by followingNathan on Linkedin, Twitter and BlueSky

Send us Fan MailPrimary Expert: Mick Wall (IT Specialist, University of Sheffield & Founder of Energy Stats UK)Host: Nathan Gambling (Beta Talk Podcast and Betateach Newsletter)Core Topics: Heat Loss Accuracy, Weather Compensation vs. Room Influence, Smart Tariffs (Octopus Energy).Executive Summary (TL;DR)Standard MCS heat loss calculations often overestimate ventilation losses in older homes by up to 300%. Expert consumer Mick Wall demonstrates that real-world air changes in a 1930s semi-detached house are closer to 0.5 ACH (Air Changes per Hour) rather than the CIBSE default of 1.5–3.0 ACH. This episode explores how to verify heat loss using Pulse Tests and CO2 Decay to prevent heat pump oversizing.1. Challenging MCS Heat Loss DefaultsStandard industry calculations often rely on static building guides that fail to account for the actual "tightness" of 20th-century builds.The Problem: Default values from CIBSE and MCS result in oversized heat pumps, leading to short-cycling and reduced efficiency. The Evidence: Mick Wall utilises three distinct methodologies to validate air change rates: Pressure Testing: Utilising the Build Test Solutions Pulse kit for rapid air evacuation measurement. CO2 Decay Monitoring: Deploying Purrmetrix sensors to track gas dissipation over 7 days. Reverse Modeling: Matching 4 years of Open Energy Monitor data against Spruce fabric loss models. 2. Comfort Dynamics: Weather Compensation vs. Room InfluenceWhile "pure" weather compensation (adjusting flow temperature based on outdoor air) is better than on/off control, it often lacks the "aggression" needed for rapid recovery.Pure Weather Comp: Best for steady-state efficiency but may fail during sudden internal temperature drops. Room Influence: Wall advocates for this approach and currently uses his Vaillant control with Havenwise which is an optimiser. Key Takeaway: Insulation (e.g., bay window upgrades) provides "unmeasurable comfort" by eliminating drafts, even when the fabric watt-saving is minimal. 3. Optimising the "Elephant in the Room": Smart TariffsA high-quality heat pump installation must perform efficiently regardless of the tariff. However, leveraging the Octopus Energy Kraken platform provides significant cost advantages.Agile vs. Cozy Tariffs: Understanding how to shift loads without sacrificing comfort. The Risk: Relying on cheap overnight electricity to "mask" a poorly designed, low-efficiency system. Support the showLearn more about heat pump heating by followingNathan on Linkedin, Twitter and BlueSky

Send us Fan MailIn this episode, Nathan sits down with economist Ben Watts, the creator of the real-time energy dashboard at kilowatts.io. They explore the hidden "engine room" of the UK’s electricity system, the high-stakes market where power is traded in 30-minute blocks. Ben explains why a single line on the map (the B6 Boundary) is costing consumers over £1 billion a year and how technology like heat pumps and EVs are moving from being "loads" to "assets" that help keep the grid balanced.Key Jargon Buster: The Grid BoundariesTo help listeners follow the conversation, here is a quick guide to the "pinch points" Ben mentions:B6 Boundary: The most critical bottleneck in the UK. It runs along the Scottish-English border.B4 Boundary: A northern bottleneck separating the Scottish Highlands from the Central Belt.The "4.5 GW" Limit: The onshore overhead cables at B6 can securely handle about 4.5 GW. When combined with the Western HVDC subsea link (2.2 GW), the total limit is roughly 6.7 GW.Wind Curtailment: When there is more wind in Scotland than the B6 "pipes" can carry, NESO pays wind farms to stop generating while paying gas plants in the South to turn on.Keywords & Themeskilowatts.io: Ben’s dashboard for visualising real-time grid data.NESO: The National Energy System Operator (the new name for the system operator in 2026).CCGT Maintenance: Why demineralised water is essential for the steam turbines in gas power plants.Flexibility Assets: Using heat pumps as "virtual power plants" to respond to grid signals at 50Hz.Support the showLearn more about heat pump heating by followingNathan on Linkedin, Twitter and BlueSky

Send us Fan MailIn this episode of BetaTalk, I talk about a subject I am deeply passionate about marketing within the UK heating sector.The UK has the most competitive heating market in Europe, with the highest boiler sales across the continent. In such a competitive environment, marketing plays an essential role. I reflect on how, at times, marketing messages can move away from fundamental heating science. This is not about blame or intent, but about acknowledging how commercial pressure and fast-moving narratives can influence communication.As scrutiny of the sector continues to increase from regulators, consumer bodies, and groups examining greenwashing, these gaps are becoming more noticeable. I talk about how this scrutiny is shaping conversations across the industry, including within marketing teams and trade bodies, where there can be tension between commercial expectations and technical accuracy.I also share why I speak about my grandfather so often on this podcast, and how his influence shaped my views on engineering, responsibility, and honesty in how we communicate technical information.This episode is a reflective discussion about marketing, science, and integrity, and how the heating industry can continue to communicate with clarity in an increasingly examined environment.Support the showLearn more about heat pump heating by followingNathan on Linkedin, Twitter and BlueSky

Send us Fan MailBetaTalk Podcast Show Notes: Air-to-Air Heat Pump Pioneering with John In this landmark episode of BetaTalk, the host sits down with John Ewbank to discuss his pioneering and invaluable research into the domestic application of Air-to-Air Heat Pumps (A2A HPs).This conversation marks a potentially historical inflection point for the UK heating sector, as Ewbank’s practical, data-driven work pushes the boundaries of efficient home heating. 🔬 The Pioneers of UK HeatingThe episode highlights a crucial lineage of highly skilled, 'geeky' homeowners and engineers who have collectively advanced the understanding and adoption of low-carbon domestic heating in the UK. Ewbank’s work stands alongside the incredible efforts of figures such as:Mick WallJohn CantorTrystan LeeGlyn HudsonThese individuals have performed & shared ground-breaking real-world research, often filling gaps left by industry. 💡 Collaboration with NestaA significant element of the discussion is John Ewbank's collaboration with Nesta, the UK's innovation foundation and think tank.The host expresses great satisfaction that Nesta is engaging directly with practitioners and heating engineers like Ewbank. Their approach is highlighted as being uniquely effective among Third Sector entities in actively supporting and utilizing the crucial data generated by this community of independent researchers.This is a vital episode for anyone interested in heat pumps, energy efficiency, and the future of UK home heating. Dive into the conversation, share it widely, and join the discussion around this incredible, pioneering work!https://www.youtube.com/@TimAndKatsGreenWalk Have Toshiba Haori set up -  Does interesting experiments.https://x.com/timothymortimer Daikin Stylish installed very happyhttps://x.com/jimmybb - Daikin Stylish installed very happyhttps://www.youtube.com/@EVPuzzle has many videos on his air to air systemhttps://www.youtube.com/@MrEV - other perspective installed has mixed feelings, but thinks was system design. Units were not optimally placed or sized My initial install & experiencehttps://johnewbank.co.uk/what-is-the-cheapest-way-to-heat-your-home/My experience when I lived with it for a bit.https://johnewbank.co.uk/living-with-an-air-to-air-heat-pump-installation-and-testing-notes/COP calculations https://johnewbank.co.uk/airtoairmonitoring/Guild Patrons PrimaryPro CastRads UK Radiators Renewables CentreSupport the showLearn more about heat pump heating by followingNathan on Linkedin, Twitter and BlueSky

Send us Fan MailThis week on BetaTalk, we're doing something truly special: the FIRST EVER exclusive interview with EDF Heat Pumps about their groundbreaking new "Express" initiative.EDF's new "Express" initiative is hitting the accelerator, promising faster, smoother heat pump deployments that are directly comparable to the cost of a boiler install. We sit down with Clay Brown from EDF Heat Pumps behind to unpack:What "Express" really means for installers and homeowners.How they're streamlining the process from survey to switch-on.The vision behind this bold step for #RenewableEnergy.Sign up to the BetaTeach newsletter to view heat pump installations from engineers in the Guild of Master Heat EngineersGUILD PATRONS:Primary ProWolseley Renewables CentreCastradsUK RadiatorsSupport the showLearn more about heat pump heating by followingNathan on Linkedin, Twitter and BlueSky