Can you repair a PSU by REMOVING a component? Well, in this case, yeah, kinda.
Not recommended for new designs, but it works (for now) because the design margins allowed it.
00:00 – My NerdQaxe++ Bitcoin miner has failed. Guru Meditation!
02:13 – Bitmain 1370 chipset thermal paste
03:54 – The flipchip die under the microscope
04:48 – Thermal paste application triggering
06:55 – Time for a new strategy R2. The Vreg temp sensor is now the suspect
07:53 – A look at the open source hardware schematic in KiCAD
https://github.com/shufps/qaxe
09:42 – The TPS53647 4 Phase ASIC Buck PSU controller
https://www.ti.com/lit/ds/symlink/tps53647.pdf
10:23 – The CSD95472Q5MC Synchronous Buck NexFET Smart Power Stage
https://www.ti.com/lit/ds/symlink/csd95472q5mc.pdf
11:50 – We can try wacking a heatsink on + Jaycar field trip
12:41 – Did that fix it?
14:10 – It’s becoming obvious what the fault is now
16:24 – Thermal camera testing
16:56 – Oscilloscope time on the 3 phase PSU
18:21 – Desoldering time, maybe
19:42 – Will removing this component work?
23:52 – AutoBalance multi-phase buck conversion for the win
Forum: https://www.eevblog.com/forum/blog/eevblog-1769-repair-by-removing-a-component/
Flere episoder fra "EEVblog"



Gå ikke glip af nogen episoder af “EEVblog” - abonnér på podcasten med gratisapp GetPodcast.








