Panel Discussion: Practical Problem Solving for Machine Learning

ASTENA: a mission concept for a deep study of the transient gamma-ray sky and for nuclear astrophysics by E. Virgilli et al. on Wednesday 30 November Gamma-ray astronomy is a branch whose potential has not yet been fully exploited. The observations of elemental and isotopic abundances in supernova (SN) explosions are key probes not only of the stellar structure and evolution but also for understanding the physics that makes Type-Ia SNe as standard candles for the study of the Universe expansion properties. In spite of its crucial role, nuclear astrophysics remains a poorly explored field mainly for the typical emission lines intensity which are vanishing small and requires very high sensitivities of the telescopes. Furthermore, in spite that the Galactic bulge-dominated intensity of positron annihilation line at 511 keV has been measured, its origin is still a mystery due to the poor angular resolution and insufficient sensitivity of the commonly employed instrumentation in the sub-MeV energy domain. To answer these scientific issues a jump in sensitivity and angular resolution with respect to the present instrumentation is required. Conceived within the EU project AHEAD, a new high energy mission, capable of tackling the previously mentioned topics, has been proposed. This concept of mission named ASTENA (Advanced Surveyor of Transient Events and Nuclear Astrophysics), includes two instruments: a Wide Field Monitor with Imaging and Spectroscopic (WFM-IS, 2 keV - 20 MeV) capabilities and a Narrow Field Telescope (NFT, 50 - 700 keV). Thanks to the combination of angular resolution, sensitivity and large FoV, ASTENA will be a breakthrough in the hard X and soft gamma--ray energy band, also enabling polarimetry in this energy band. In this talk the science goals of the mission are discussed, the payload configuration is described and expected performances in observing key targets are shown. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16916v1

3UCubed: The IMAP Student Collaboration CubeSat Project by Marcus Alfred et al. on Wednesday 30 November The 3UCubed project is a 3U CubeSat being jointly developed by the University of New Hampshire, Sonoma State University, and Howard University as a part of the NASA Interstellar Mapping and Acceleration Probe, IMAP, student collaboration. This project comprises of a multidisciplinary team of undergraduate students from all three universities. The mission goal of the 3UCubed is to understand how Earths polar upper atmosphere the thermosphere in Earths auroral regions, responds to particle precipitation and solar wind forcing, and internal magnetospheric processes. 3UCubed includes two instruments with rocket heritage to achieve the science mission: an ultraviolet photomultiplier tube, UVPMT, and an electron retarding potential analyzer ERPA. The spacecraft bus consists of the following subsystems: Attitude Determination and Control, Command and Data Handling, Power, Communication, Structural, and Thermal. Currently, the project is in the post-PDR stage, starting to build and test engineering models to develop a FlatSat prior to critical design review in 2023. The goal is to launch at least one 3U CubeSat to collect science data close to the anticipated peak of Solar Cycle 25 around July 2025. Our mother mission, IMAP, is also projected to launch in 2025, which will let us jointly analyze the science data of the main mission, providing the solar wind measurements and inputs to the magnetosphere with that of 3UCubed, providing the response of Earths cusp to these inputs. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15781v1

Posterior samples of source galaxies in strong gravitational lenses with score-based priors by Alexandre Adam et al. on Wednesday 30 November Inferring accurate posteriors for high-dimensional representations of the brightness of gravitationally-lensed sources is a major challenge, in part due to the difficulties of accurately quantifying the priors. Here, we report the use of a score-based model to encode the prior for the inference of undistorted images of background galaxies. This model is trained on a set of high-resolution images of undistorted galaxies. By adding the likelihood score to the prior score and using a reverse-time stochastic differential equation solver, we obtain samples from the posterior. Our method produces independent posterior samples and models the data almost down to the noise level. We show how the balance between the likelihood and the prior meet our expectations in an experiment with out-of-distribution data. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.03812v2

PERISTOLE: PackagE that geneRates tIme delay plotS caused by graviTatiOnaL lEnsing by T. S. Sachin Venkatesh et al. on Wednesday 30 November We present PERISTOLE to study the various time delays associated with the pulsar rotation and other general relativistic aspects of binary pulsars. It is made available as an open-source python package which takes some parameters of the double pulsar system as input and outputs the rotational and latitudinal lensing delays along with the geometric and Shapiro delays that arise due to gravitational lensing. This package was intended to provide a way to quickly analyse, evaluate and study the differences between variations of the same systems and also to quantify the consequences that different parameters have over the system. Through this research note, we briefly describe the motivation behind PERISTOLE and showcase its capabilities using the only double pulsar system ever found, J0737-3039. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16036v1

Panel Discussion: Practical Problem Solving for Machine Learning by Guillermo Cabrera et al. on Wednesday 30 November Machine Learning is a powerful tool for astrophysicists, which has already had significant uptake in the community. But there remain some barriers to entry, relating to proper understanding, the difficulty of interpretability, and the lack of cohesive training. In this discussion session we addressed some of these questions, and suggest how the field may move forward. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16782v1

JWST NIRCam Defocused Imaging: Photometric Stability Performance and How it Can Sense Mirror Tilts by Everett Schlawin et al. on Wednesday 30 November We use JWST NIRCam short wavelength photometry to capture a transit lightcurve of the exoplanet HAT-P-14 b to assess performance as part of instrument commissioning. The short wavelength precision is 152 ppm per 27 second integration as measured over the full time series compared to a theoretical limit of 107 ppm, after corrections to spatially correlated 1/f noise. Persistence effects from charge trapping are well fit by an exponential function with short characteristic timescales, settling on the order of 5-15 minutes. The short wavelength defocused photometry is also uniquely well suited to measure the realtime wavefront error of JWST. Analysis of the images and reconstructed wavefront maps indicate that two different hexagonal primary mirror segments exhibited "tilt events" where they changed orientation rapidly in less than ~1.4 seconds. In some cases, the magnitude and timing of the flux jumps caused by tilt events can be accurately predicted with a telescope model. These tilt events can be sensed by simultaneous longer-wavelength NIRCam grism spectral images alone in the form of changes to the point spread function, diagnosed from the FWHM. They can also be sensed with the FGS instrument from difference images. Tilt events possibly from sudden releases of stress in the backplane structure behind the mirrors were expected during the commissioning period because they were found in ground-based testing. Tilt events have shown signs of decreasing in frequency but have not disappeared completely. The detectors exhibit some minor (less than 1%) deviations from linear behavior in the first few groups of each integration, potentially impacting absolute fluxes and transit depths on bright targets where only a handful of groups are possible. Overall, the noise is within 50% of the theoretical photon noise and read noise. This bodes well for high precision time series measurements. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16727v1

Spectroscopic time series performance of the Mid-Infrared Instrument on the JWST by Jeroen Bouwman et al. on Wednesday 30 November We present here the first ever mid-infrared spectroscopic time series observation of the transiting exoplanet \object{L 168-9 b} with the Mid-Infrared Instrument (MIRI) on the James Webb Space Telescope. The data were obtained as part of the MIRI commissioning activities, to characterize the performance of the Low Resolution Spectroscopy (LRS) mode for these challenging observations. To assess the MIRI LRS performance, we performed two independent analyses of the data. We find that with a single transit observation we reached a spectro-photometric precision of $\sim$50 ppm in the 7-8~\micron~range at R=50, consistent with $\sim$25 ppm systematic noise. The derived band averaged transit depth is 524~$\pm$~15~ppm and 547~$\pm$~13~ppm for the two applied analysis methods, respectively, recovering the known transit depth to within 1~$\sigma$. The measured noise in the planet's transmission spectrum is approximately 15-20\% higher than random noise simulations over wavelengths $6.8 \lesssim \lambda \lesssim 11$ $\mu$m. We observed an excess noise at shorter wavelengths, for which possible causes are discussed. This performance was achieved with limited in-flight calibration data, demonstrating the future potential of MIRI for the characterization of exoplanet atmospheres. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16123v1

Adding Workflow Management Flexibility to LSST Pipelines Execution by Michelle Gower et al. on Wednesday 30 November Data processing pipelines need to be executed at scales ranging from small runs up through large production data release runs resulting in millions of data products. As part of the Rubin Observatory's pipeline execution system, BPS is the abstraction layer that provides an interface to different Workflow Management Systems (WMS) such as HTCondor and PanDA. During the submission process, the pipeline execution system interacts with the Data Butler to produce a science-oriented execution graph from algorithmic tasks. BPS converts this execution graph to a workflow graph and then uses a WMS-specific plugin to submit and manage the workflow. Here we will discuss the architectural design of this interface and report briefly on the recent production of the Data Preview 0.2 release and how the system is used by pipeline developers. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15795v1

Using a Conditional Generative Adversarial Network to Control the Statistical Characteristics of Generated Images for IACT Data Analysis by Julia Dubenskaya et al. on Wednesday 30 November Generative adversarial networks are a promising tool for image generation in the astronomy domain. Of particular interest are conditional generative adversarial networks (cGANs), which allow you to divide images into several classes according to the value of some property of the image, and then specify the required class when generating new images. In the case of images from Imaging Atmospheric Cherenkov Telescopes (IACTs), an important property is the total brightness of all image pixels (image size), which is in direct correlation with the energy of primary particles. We used a cGAN technique to generate images similar to whose obtained in the TAIGA-IACT experiment. As a training set, we used a set of two-dimensional images generated using the TAIGA Monte Carlo simulation software. We artificiallly divided the training set into 10 classes, sorting images by size and defining the boundaries of the classes so that the same number of images fall into each class. These classes were used while training our network. The paper shows that for each class, the size distribution of the generated images is close to normal with the mean value located approximately in the middle of the corresponding class. We also show that for the generated images, the total image size distribution obtained by summing the distributions over all classes is close to the original distribution of the training set. The results obtained will be useful for more accurate generation of realistic synthetic images similar to the ones taken by IACTs. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15807v1

Visual Magnitude of the BlueWalker 3 Satellite by Anthony Mallama et al. on Wednesday 30 November Observations have been carried out in order to assess the optical characteristics of the BlueWalker 3 spacecraft which is the prototype for a new satellite constellation. The illumination phase function has been determined and evaluated. The average visual magnitude when seen overhead at the beginning or ending of astronomical twilight is found to be +1.4. arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.09811v2