Simini Boards Cast

In this BoardsCast episode, we continue Tobias Chapter 44 — Bandaging, External Coaptation, and External Devices for Companion Animals with a simple but important reframing:“Put a brace on it” is not a treatment plan. An orthosis only works when its stiffness, hinge location, permitted motion, fit, and skin tolerance are matched to the actual mechanical problem.The core rule is:An orthosis is a mechanical prescription.Prescribe the mechanics first. Then build the device.We break down the major jobs an orthosis can perform:Immobilize a regionRestrict a dangerous motionGuide motionAssist weak motionProtect healing tissueSupport a body part during function Then we connect those jobs to real clinical problems:Carpal or tarsocrural hyperextension → restrict extensionMedial shoulder instability → restrict abductionRadial nerve dysfunction → assist carpal extensionSciatic or peroneal dysfunction → assist tarsocrural flexionHealing fractures or soft tissues → provide targeted protection The next question is stiffness.Rigid orthoses provide more support.Semi-rigid devices provide intermediate control.Flexible devices provide less support but are lighter and often less abrasive.The goal is not maximum stiffness. It is enough stiffness for the job.Then come hinges.A hinge does not simply stop motion. It determines which motion is allowed and which motion is blocked.Motion in the plane of the hinge is allowed. Motion perpendicular to that plane is restricted. That principle is beautifully demonstrated by the hinged carpal orthosis discussed in Tobias Chapter 44: extension can be mechanically limited while useful flexion is preserved.But even perfect device design can fail if the interface fails.Poor fit creates slipping. Slipping creates friction. Friction creates pressure concentration and skin injury.So:Fit is part of the mechanics. Skin is part of the construct.And fitting cannot be judged with the patient standing still. The device needs to be evaluated during walking, sitting, lying down, rising, and transitions between positions. Finally, an orthosis has limits.A device can assist function that still exists. It cannot manufacture function that has been lost.A brace can support a carpus. It does not prove the ligament will heal.A stifle orthosis may improve limb use. It does not necessarily eliminate craniotibial translation.Support is not reconstruction.The surgical mindset is:What exact mechanical behavior do I need from this device?—🎁 Simini BonusClaim your free sample of Simini Protect Lavage (just cover shipping):https://www.simini.com/evaluation-kitListen On: Spotify | Apple Podcasts | Amazon Music

In this BoardsCast episode, we finish Tobias Chapter 44 — Bandaging, External Coaptation, and External Devices for Companion Animals with the concept that determines whether even the most advanced prosthetic device succeeds or fails:The interface determines whether the prosthesis works. A prosthesis is not just a replacement for missing limb length. It is a load-transfer system.Force has to move from the patient’s body, through the residual limb, across the skin-device interface, into the prosthesis, and finally into the ground—then back up the same chain.If that handoff fails, function fails.We break down the three dimensions of prosthetic stability:Axial stability — controls traction and compressionAngular stability — controls bendingRotational stability — controls twisting, pronation, and supinationAnd the corresponding failure modes:Pistoning = axial instabilityRocking = angular instabilityTwisting = rotational instability The key mechanical warning:Stable in one direction does not mean stable.A socket may resist axial traction perfectly and still rotate around the residual limb when torque is applied.We also break down:Why longer residual limbs generally provide better prosthetic stabilityWhy preserving useful bony landmarks can improve rotational controlWhy a longer prosthesis creates a larger lever arm and increases interface loadWhy socket fit must be snug, not tightWhy too loose causes motion and frictionWhy too tight creates pressure, ischemia, and tissue injuryWhy excessive skin mobility in dogs and cats can make socket prostheses mechanically difficultWhy hair loss, redness, licking, chewing, abrasions, and ulceration are warning signs of interface failureHow passive hinges may actually improve axial and rotational stability by letting the device move with the patient instead of fighting normal joint motionWhy prosthetic integration requires progressive functional training—from tolerance at rest to standing, walking, trotting, and normal activity Then we contrast the socket-based exoprosthesis with transdermal osseointegrated prostheses.Osseointegration bypasses the external socket and anchors directly to bone, eliminating many problems of pistoning, rocking, and skin sliding.But it creates a completely different weak link:The skin-implant barrier.You trade socket instability for the risk of chronic infection at a permanent transcutaneous interface. The clinical question becomes:“Where is the handoff failing?”For a socket prosthesis, ask whether you can control axial, angular, and rotational motion while protecting the skin.For a transdermal implant, ask whether bone fixation is stable and whether the soft tissue and skin interface can remain biologically integrated and infection-resistant.—🎁 Simini BonusClaim your free sample of Simini Protect Lavage (just cover shipping):https://www.simini.com/evaluation-kitListen On: Spotify | Apple Podcasts | Amazon Music

In this BoardsCast episode, we continue Tobias Chapter 44 — Bandaging, External Coaptation, and External Devices for Companion Animals with one of the most important practical reframes in day-to-day orthopedics:The bandage is a pressure system. A bandage can look perfect on the outside and still be creating focal compression, friction, ischemia, and tissue injury underneath. The goal is not simply to keep the bandage in place. The real question is:“Where did the pressure go?”The central mechanical rule is:Distributed pressure protects. Focal pressure injures. We break down the three-layer architecture of a soft-padded bandage:Padding layer — protects the skin and distributes pressureRolled gauze — stabilizes the paddingOuter layer — secures the constructTobias describes using roughly 3–5 layers of cast padding followed by 2–3 layers of rolled gauze, with the thickness adjusted as needed. The reason for that bulk is mechanical: the padding creates the safety margin between living tissue and the more abrasive, tensioned outer layers. We also break down:Why bony prominences such as the accessory carpal bone, olecranon, and tuber calcanei are pressure magnetsHow a padding donut redistributes force around a prominence instead of concentrating it directly on the pointWhy the distal extremity should generally be included in the bandageWhy layers are applied distal to proximal to minimize venous blood trappingWhy the skin should contact padding—not abrasive gauze, tape, or fiberglassWhy the padding should extend about 1 cm beyond the gauze and outer tape at the proximal edgeWhy wrapping the cranial antebrachium lateral to medial is safer than medial to lateral because of the risk of inducing supinationWhy a thoracic spica wrap must be applied without tension around the chest to avoid restricting respiration Then we follow the complication cascade:Poor pressure distribution → focal compression/friction → capillary compromise → redness/chafing → bruising → ischemia → necrosis.And the complication rates are not trivial. Tobias cites a retrospective series in which 38 of 60 cast-treated patients (63%) developed soft-tissue complications. In another report of 11 animals with ischemic bandage injuries, five required skin grafting, three required toe amputations, and two required limb amputation. The surgical mindset is:Spread the load. Protect the edges. Protect the points.—🎁 Simini BonusClaim your free sample of Simini Protect Lavage (just cover shipping):https://www.simini.com/evaluation-kitListen On: Spotify | Apple Podcasts | Amazon Music

In this BoardsCast episode, we continue Tobias Chapter 44 — Bandaging, External Coaptation, and External Devices for Companion Animals with a simple mechanical rule:“Immobilize the limb” is not a plan. Different injuries fail in different directions. Flexion. Extension. Abduction. Rotation. Weight bearing. If you do not define the dangerous motion first, you cannot choose the right external device.The core rule is:Control the motion you actually need to stop. We break down:Why splints, spicas, slings, and hobbles are not interchangeableWhy the first question should be: “What motion threatens the repair?”Why more immobilization does not automatically equal more protectionHow excessive restriction contributes to muscle atrophy, joint stiffness, and cartilage changesWhy a standard splint works well for distal joint control but cannot reliably control a proximal jointWhy proximal stabilization often requires the construct to borrow the torsoHow a spica splint limits shoulder and elbow motionWhy thoracic wrapping in a spica must be applied without tension to avoid restricting chest expansionHow a Velpeau sling suspends the thoracic limb and prevents weight bearingWhy slippage in a Velpeau can compromise distal blood flowHow an Ehmer sling suspends the pelvic limb while creating internal hip rotationWhy that rotational effect makes the Ehmer appropriate for dorsal hip luxationWhy a 90-90 bandage limits stifle and tarsocrural extension without intentionally reproducing the Ehmer rotational effectHow thoracic and pelvic hobbles selectively restrict abduction while permitting more overall functionWhy increasing hobble tether length over time allows progressively greater motion during recovery The surgical mindset is:Prescribe a motion, not a device.Ask:Is the threat weight bearing? Flexion? Extension? Abduction? Rotation? Do I need full suspension—or just one vector controlled?—🎁 Simini BonusClaim your free sample of Simini Protect Lavage (just cover shipping):https://www.simini.com/evaluation-kitListen On: Spotify | Apple Podcasts | Amazon Music

In this BoardsCast episode, we begin Tobias Chapter 44 — Bandaging, External Coaptation, and External Devices for Companion Animals with a challenge to one of the most common orthopedic reflexes:“Should we splint it too, just for protection?”The problem is that immobilization is not a harmless extra layer of security. Every time you restrict a limb, you are making a biological and mechanical trade.The core rule is:Immobilization is a prescription, not a default. We break down:Why external coaptation primarily works by decreasing joint motionWhy less motion may decrease pain and reduce some limb loadingHow specific devices can restrict specific movements rather than immobilizing the entire limbWhy the surgeon must ask: “What specific motion or load am I trying to control?”Why immobilization does not eliminate internal muscle forcesWhy a cast or splint cannot reliably rescue inadequate fracture fixationThe safety equation: adequate fixation + targeted coaptation = useful adjunctWhy inadequate fixation + prolonged coaptation = unsafe strategyWhy bandaging does not reliably reduce postoperative swellingWhy excessive immobilization causes muscle loss, joint stiffness, bone changes, and cartilage degenerationHow external coaptation can interfere with rehabilitation, cold therapy, massage, and passive range of motionWhy the device itself can cause skin injury, pressure necrosis, ischemia, and major soft-tissue complications One of the most important mechanical reminders:Immobilized does not mean unloaded.And one of the most important biological reminders:No motion is also a mechanical environment.The surgical mindset is:Prescribe the restriction.Ask what tissue you are protecting, what motion threatens it, whether weight bearing is dangerous, whether the internal fixation is already adequate, how much restriction is actually required, and how soon you can safely give motion back.—🎁 Simini BonusClaim your free sample of Simini Protect Lavage (just cover shipping):https://www.simini.com/evaluation-kitListen On: Spotify | Apple Podcasts | Amazon Music

In this BoardsCast episode, we continue Tobias Chapter 43 — Overview of Minimally Invasive Osteosynthesis Principles with the mechanical rule that sits underneath every bridging construct:The implant bridges. Biology fills the gap. In a highly comminuted fracture treated with MIO, the cortical column is not reconstructed. That preserves the fracture hematoma, periosteum, and blood supply—but mechanically it means the bone may contribute little or no early load sharing.So the implant becomes temporary infrastructure.We break down:Why comminution forces the implant to carry most or all of the early mechanical loadWhy MIO aims for optimal stability, not absolute rigidityHow excessive flexibility creates high interfragmentary strain, delayed healing, and implant fatigueHow excessive rigidity can create stress shielding and reduce the mechanical stimulus for healingWhy the surgeon has to think in terms of load pathsHow three major MIO constructs solve the same problem in different ways:External skeletal fixator = bridge outside the limbLocking plate = internal fixator beneath the soft tissuesInterlocking nail = bridge near the mechanical axis With ESF, the major mechanical disadvantage is eccentricity. The external bar sits away from the bone, increasing the bending moment and concentrating stress at the pin-bone interface.With locking plates, the screw heads lock directly into the plate, eliminating the need for plate-bone friction. That helps preserve periosteal perfusion—but excessive plate elevation increases the moment arm and the risk of fatigue failure. We also break down one of the most board-relevant concepts in bridge plating:Working length = the distance between the innermost screws on either side of the fracture.Move those screws farther away → longer working length → greater construct compliance.Move them closer → shorter working length → greater stiffness.But the goal is not maximum compliance. It is the right amount.Finally, we contrast the interlocking nail, which sits close to the neutral mechanical axis and therefore experiences a smaller bending moment. The nail handles bending while the locking bolts provide axial and rotational control. The surgical mindset is:Follow the load.Ask:“Can the bone share the load? If not, where is that load going—and can my construct survive it long enough for biology to take over?”—🎁 Simini BonusClaim your free sample of Simini Protect Lavage (just cover shipping):https://www.simini.com/evaluation-kitListen On: Spotify | Apple Podcasts | Amazon Music

In this BoardsCast episode, we finish Tobias Chapter 43 — Overview of Minimally Invasive Osteosynthesis Principles with the complication lesson that matters most:Preserving biology only helps if the alignment and fixation are actually correct. MIO lowers the biological cost of fracture repair by preserving the hematoma, periosteum, and soft-tissue envelope. But that biological advantage comes with a trade-off: less exposure means less direct visualization, and less visualization increases technical risk.The core rule:Minimize trauma, not judgment. Minimally invasive does not mean minimally risky.We break down:Why malalignment is one of the major technical challenges of MIOWhy rotational and varus/valgus errors can create major functional problemsWhy a perfect fluoroscopic image in one plane can hide a terrible reduction in anotherWhy alignment must be verified using multiple planes, adjacent joints, and anatomic landmarksHow long bridging plates can increase the risk of terminal screw joint penetrationWhy locking screw trajectories are constrained by the plateHow shorter screws, non-locking screws, plate contouring, or plate-length selection can help avoid the jointWhy blind implant passage makes detailed three-dimensional anatomy mandatoryWhy humeral MIO carries particular neurovascular riskWhy biological fixation does not mean accepting a massive residual fracture gapWhy repeated closed-reduction and tunneling attempts can create severe hidden periosteal and soft-tissue traumaWhy excessive plate offset increases screw cantilever bending and fatigue risk Then comes the judgment call that separates technique from dogma:If atraumatic MIO is no longer working, convert to open reduction.A clean, controlled open approach may preserve more biology than forty minutes of aggressive blind manipulation through a tiny incision.The key surgical question is:“Am I still preserving biology—or am I traumatizing it just to avoid opening?”—🎁 Simini BonusClaim your free sample of Simini Protect Lavage (just cover shipping):https://www.simini.com/evaluation-kitListen On: Spotify | Apple Podcasts | Amazon Music

In this BoardsCast episode, we continue Tobias Chapter 43 — Overview of Minimally Invasive Osteosynthesis Principles with the planning rule that makes MIO possible:If you can’t see the fracture, you have to plan it. Minimally invasive osteosynthesis preserves fracture biology by giving up direct visualization. You leave the hematoma, periosteum, and soft-tissue envelope alone—but in exchange, you lose the comfort of staring directly at the fracture.That means preparation has to replace vision.We break down:Why MIO trades direct visualization for preoperative planningWhy high-quality orthogonal radiographs are essentialWhy the contralateral normal limb becomes the patient-specific blueprintWhy radiographic magnification makes eyeballing implant size unreliableWhy a calibration marker is critical for accurate templatingWhen radiographs are enough—and when CT becomes necessaryHow multiplanar and 3D CT reconstructions reveal complex periarticular, intraarticular, and axial fracture geometryWhy operating-room layout, table choice, patient positioning, and fluoroscopy access become part of the reduction planWhy C-arm mobility should be confirmed before drapingHow fluoroscopy replaces direct vision during MIOWhy alignment must be checked in multiple planes—not just one beautiful projectionHow full-size and mini C-arms differ in practical useWhy radiation safety must follow the ALARA principleHow collimation, shielding, source positioning, and distance reduce exposure The surgical mindset is:Do the operation twice: first in your head, then in the patient.Before the incision, know the fracture geometry, the normal alignment, the implant size, the portal locations, the required fluoroscopic views, and whether your equipment can physically obtain them.—🎁 Simini BonusClaim your free sample of Simini Protect Lavage (just cover shipping):https://www.simini.com/evaluation-kitListen On: Spotify | Apple Podcasts | Amazon Music

In this BoardsCast episode, we continue Tobias Chapter 43 — Overview of Minimally Invasive Osteosynthesis Principles with the reduction principle that separates biological fixation from traditional fragment-by-fragment reconstruction:Reduce the limb, not every fragment. For most diaphyseal fractures, a successful reduction does not require every intermediate piece of bone to be put back exactly where it started. What matters is restoring the functional geometry of the limb while preserving the biology of the fracture zone.That means separating alignment from apposition.The four non-negotiable alignment targets are:LengthSagittal alignmentFrontal alignmentRotationWe break down:Why chasing intermediate fragments damages their soft-tissue attachments and periosteal blood supplyWhy the fracture hematoma is part of the biological engine of healingWhy MIO prioritizes alignment over perfect fragment apposition in diaphyseal fracturesHow distraction becomes the core mechanical principle of indirect reductionWhy traction restores length and helps fatigue muscle spasmHow the hanging-leg technique uses body weight and gravity as reduction toolsHow tension in the surrounding soft-tissue envelope helps guide intermediate fragments toward the limb axisHow ligamentotaxis uses intact ligaments, capsule, and tendons to help reduce periarticular fragmentsHow percutaneous joysticks give the surgeon multiplanar control of the major proximal and distal fragmentsWhy temporary reduction tools must be positioned so they do not block the definitive implantWhy biological reduction does not mean accepting a massive residual gapWhy repeated failed closed-reduction attempts can create more tissue trauma than a controlled open approach The critical exception remains the joint:The diaphysis prioritizes alignment. The articular surface requires anatomic reconstruction.The surgical mindset is:Control the ends. Leave the middle alone.—🎁 Simini BonusClaim your free sample of Simini Protect Lavage (just cover shipping):https://www.simini.com/evaluation-kitListen On: Spotify | Apple Podcasts | Amazon Music

In this BoardsCast episode, we begin Tobias Chapter 43 — Overview of Minimally Invasive Osteosynthesis Principles with a surgical principle that completely changes how you look at a comminuted fracture:Preserve the biology. Stop chasing every fragment. A shattered bone is not just a pile of calcium waiting to be reconstructed. It is a living biologic system made up of fracture hematoma, periosteum, blood supply, muscle, soft-tissue attachments, growth factors, and reparative cells.That means every clamp, retractor, incision, and fragment you manipulate comes with a biological price.We break down:Why the fracture hematoma is healing infrastructure, not surgical debrisHow periosteum, muscle, and soft-tissue attachments preserve blood supply to individual fragmentsWhy aggressive fragment-by-fragment reconstruction can create delayed union, nonunion, and infectionThe evolution from ORIF → open-but-do-not-touch → minimally invasive osteosynthesisWhy MIO uses indirect reduction and remote access to minimize disturbance of the fracture zoneWhy the goal for most diaphyseal fractures is restoration of length, rotation, sagittal alignment, and frontal alignmentWhy you can leave biologically viable intermediate fragments aloneWhy articular fractures remain the major exception and require accurate anatomic reconstructionWhy MIO seeks optimal stability, not maximum rigidityHow controlled micromotion supports callus formation and secondary healingWhy long bridging constructs can bypass the comminuted zone without disturbing itWhy “minimally invasive” refers to the overall tissue footprint, not simply the size of the skin incisionHow MIPO uses remote incisions and an epiperiosteal tunnel to place a plate without opening the fracture itself The key surgical mindset is:Spend as little biology as possible.Ask whether length, rotation, alignment, joint congruity, and construct stability are acceptable—and then ask:“What can I safely leave alone?”—🎁 Simini BonusClaim your free sample of Simini Protect Lavage (just cover shipping):https://www.simini.com/evaluation-kitListen On: Spotify | Apple Podcasts | Amazon Music