Foundations of Amateur Radio

Foundations of Amateur Radio Some life lessons require additional reinforcement from time to time. This week I was strongly encouraged to remember a lesson that can be summarised as: "A place for everything and everything in its place." It was first uttered like that to me a quarter of a century ago by a client who used it frequently around their staff. It means that all the stuff that fills up the space around you, in this case, physical stuff, needs to have a specific home and if you're not actively using it, that is where it should be. This is useful in a context where you have lots of little things that you need from time-to-time, or if you have several people dependent on the availability of a single thing, like say the labelling machine used to tag equipment. The other day an incident involving a tiny tablet that went flying across the kitchen bench, bounced over the edge and vanished, not helped by the fact that taking the tablet was time sensitive and the fact that the vacuum cleaner was right there - no the tablet was not inside, I checked. I walked around the bench to the other side and started rolling on the ground with the aid of the torch on my phone. Ten minutes in, still nothing. I remembered that my go-bag has a torch, so I went to get it from its place. One problem, it wasn't there. I turned the bag upside down and went through it. Nope, no torch. That's two things that vanished. Neither has resurfaced at this point. I went to the chemist to get another tablet and took it 40 minutes late. The torch however was not so easy to resolve. My, what I call go-bag, has a bunch of life affirming essentials. It started pretty soon after becoming a radio amateur. It has two jumpers, long-leg underwear, an under shirt, a towel and a microfibre cloth, leather gloves, mosquito net, medication, band-aids, toilet paper, soap and some empty bags. It also has a torch, well, not right now it doesn't. After failing on my mission to locate the torch, I started stuffing the contents of my go-bag, straight back into its bag, only to realise that I wasn't helping future me. I stopped, pulled everything back out and started folding everything neatly. Then I repacked the bag. I've put in a stand-by torch, in Dutch they're called a "knijpkat", or a mechanically operated torch. You squeeze it in your hand and in doing so you move a dynamo that charges either a battery or a capacitor. It's called a "pinch cat" because it sounds a little like that. The light is fine for getting around in the dark, but you wouldn't mistake it for a super bright, eyeball burning, LED torch. In case you're wondering why I'm going into such detail about this, it's because you never know when you need something. It might be urgent, or it might not be. Having your stuff organised in such a way that you can find it, can sometimes be the difference between life and death. Now I get it. Not everyone works like this. I have for decades had a system on my desk where I know where all the bits of paper are and it's not helpful if someone cleans it up, because at that point I have no reference to anything and I will have to go through the whole box of things to find what I need. When my partner and I travelled around Australia in an Iveco Daily stuffed to the gunnels with electronics equipment, clothes, food, camping gear, a two metre satellite dish and plenty of other things, I had a system that involved four filing cabinets bolted into the van, combined with a dozen or more crates, metal hooks, straps and a safe. I was forever putting things away in the exact same place, each time. It's not a process that comes naturally to everyone and so we settled on a process where I would pack the van so I could lay my hands on anything within seconds, from the socket set to the satellite signal finder, from a clean pair of shorts to a raincoat, from a fuel funnel to a water funnel. Pro-tip, don't mix the two. Tools aside, of course this system also applies to the first aid kit and the fire extinguisher, the fire blanket, band-aids and medication, and in this case a torch. You might ask how this could apply to amateur radio. Go-bag aside, looking around my radio shack, it has lots of little things, like adaptors, measuring gadgets, chargers, fly leads, microphone clips, coax switches and plenty of other stuff. If everything in your shack is in use, this isn't an issue, but if you're like me and don't have your NanoVNA, and all the SMA to something adaptors, or plenty of other things lying around for that "just in case" time, then having a place for everything and everything in its place is a very productive way to keep things organised so you don't spend half your life looking for things. Similarly, if you know where your portable shack is, your battery charger, an emergency antenna, or some other essential item, you'll discover that when it comes down to the pointy end of a situation, this might make a difference. So, how do you keep your life, and shack, organised and what other processes and methods have you tried? I'm Onno VK6FLAB

Foundations of Amateur Radio In the early 1920's long distance communication using radio was a growing interest. At the time it was thought that communication that we take for granted today, over long-distance HF, was limited to long wave or extremely low frequencies, the lower the better. With that restriction came massive antennas and high power transmitters, available only to commercial and government stations. Then radio amateurs let the cat out of the bag by discovering that so-called "short wave" radio could be heard all across the globe. As an aside, today, "short wave" seems quaint, because we've discovered that even shorter waves can be used to communicate, right down to nanometre communication as shown by NASA in its XCOM technology demonstration on the 12th of May, 2019. On a daily basis we use 120 mm and 60 mm waves when we use 2.4 and 5 GHz Wi-Fi for example. As a result of the discovery of short wave radio, a gold-rush emerged. There was a hunger in the community for radio, businesses and communities adopted the new medium, there were radio courses being taught in Universities, church services and other forms of entertainment started filling the airwaves. Comedy, talk shows, music, concerts, serials and dramas spread across the electromagnetic spectrum and radio amateurs who had discovered the phenomenon were running the risk of being pushed aside by commercial interests willing to pay for access. As I've said before, in many countries at the time, amateur radio was actively discouraged, sometimes it was even illegal. Before we continue, I should quote some statements made about radio before the gold-rush which at the time was seen as "Telegraphy Without Wires". In 1865 a Boston Post editorial proclaimed: "Well-informed people know it is impossible to transmit the voice over wires and that were it possible to do so, the thing would be of no practical value." Lord Kelvin, President of the Royal Society, said: "Radio has no future." and went on to say: "Wireless is all very well but I'd rather send a message by a boy on a pony", he also said: "Heavier-than-air machines are impossible." and "X-Rays will prove to be a hoax." Not all statements aged as badly. The New York Times said in 1899: "All the nations of the earth would be put upon terms of intimacy and men would be stunned by the tremendous volume of news and information that would ceaselessly pour in upon them." Back to the IARU. Before a business trip to Europe, the board of directors of the ARRL asked their President, Hiram Percy Maxim, to encourage international amateur relations, which on 12 March 1924 resulted in a dinner given, at the Hotel Lutetia in Paris according to Hiram, a "certain dining room" by "the most distinguished radio men of Europe." Hiram goes on to say that: "This A.R.R.L. President has sat in at a good many very impressive radio meetings in the past, ranging from Maine to California, but he has never sat in at a meeting where there was quite as much thrill as at this meeting in Paris where the amateurs of nine different countries sat down together." The countries were, France, Great Britain, Belgium, Switzerland, Italy, Spain, Luxembourg, Canada and the United States. Hiram remarks that "Denmark was represented by a letter in which regret was expressed at the inability to have a representative present and asked that the amateurs of Denmark be counted in." You should dig up a copy of the May 1924 edition of QST to get a sense of occasion where the ARRL president compares the thrill of the "hamfest" to the atmosphere during that dinner and pities those who have never experienced it. During the meeting it was decided to form an organisation which was going to be called the International Amateur Radio Union. A temporary committee was formed that appointed Hiram Maxim as the chair and Dr. Pierre Corret as secretary to take charge of the details to create a permanent organisation. The final decision was to call for a general Amateur Congress on the Easter Holiday of 1925 where the IARU would be formalised. On the 14th of April, 1925, 250 radio amateurs from 23 countries met in Paris and over the next four days the details of the new Union were hammered out. Among those details were that the organisation was chiefly for "the coordination and fostering of international two-way amateur communication, that it should be an organisation by individual memberships until strong national societies had been formed in the principal nations and a federation would be feasible, and that its headquarters would be located in the USA." The constitution was written over a day and night session and by the morning of the 17th of April, every delegate had a copy and then the hard work began, approving the constitution, section by section, by the entire Congress. On the morning of the 18th, elections were held and Hiram U1AW was elected international president, Gerald G2NM, international vice-president, Jean F8GO and Frank Z4AA councillors-at-large and Kenneth U1BHW international secretary-treasurer. With the election complete, the IARU was officially in business. The new constitution was published in English, French and Esperanto. Why Esperanto, you ask? In the middle of 1924, the ARRL adopted Esperanto as its official auxiliary language. According to Clinton B. DeSoto, W1CBD, author of a fabulous book "Two Hundred Meters And Down - The Story of Amateur Radio", that might have been the highest official recognition that language ever received. Credit to Clinton for much of the time line and wording I've shared here. I'll leave you with one final quote from his book. Clinton W1CBD writes: "One day amateur television is bound to come, however remote though that day may be. It is, indubitably, inevitable that one day amateurs will be able to see each other, as well as talk with each other; and when that day comes the development of amateur radio as a social institution will have taken another great step forward - at least according to present standards. But by then the standards will have changed, and amateurs will have something more to work toward, and the ultimate will still not have arrived. There are always new goals, new horizons. May it fall to amateur radio to march many steps toward the goal of complete knowledge ere its footprints are lost in the sands of time!" I'm Onno VK6FLAB

Foundations of Amateur Radio A great deal of energy is expended on the notion of operating portable. I've talked about this plenty of times. Issues like power, antennas, suitable radios, logging, transport and time of day all come to mind. Some activities are framed specifically as portable operations. Things like Summits On The Air, or SOTA, Parks On The Air, or POTA, World Wide Flora and Fauna, or WWFF. There's field days, portable contests and specific activities like the 2014 activation of FT5ZM on Amsterdam Island and the 2016 activation of VK0EK on Heard Island. I mention those last two specifically since I had the distinct pleasure of meeting those teams and had the opportunity to interview each amateur whilst enjoying a typical Aussie BBQ. I'll point out that no shrimps were thrown anywhere. You can find those interviews with FT5ZM and VK0EK on my website at vk6flab.com. Each of these activities are framed in the context of the activity, as-in, you climb a mountain with a radio and then you make noise. That's not the only way to go portable. One of my friends checks in to the weekly F-troop as a portable station most weeks. Glynn VK6PAW gets in his car, drives to some random location and participates from wherever he happens to be at the time. In doing so, the radio part of it, is the add-on between leaving home and arriving at a destination for a cup of coffee. Charles NK8O works all over the United States. When he checks into F-troop, he's rarely in the same place two weeks in a row. In between work and sleep you'll find him activating a nearby park. He's been doing this for quite some time. While this is a POTA activity, he finds parks that fit into his life, rather than point at a park and make a specific trip there to activate it. Before I continue, I'd like to mention that I'm not dismissing making a specific trip. Far from it. The point I'm making is that making any such trip is extra work. It's an added activity in your life. Whilst entirely enjoyable, there's plenty of times where that's just not possible. Instead I'd like to look at this from the other side. Both Glynn and Charles have a radio with them. Perhaps not all the time, but often enough that they can activate their station when they happen to be in a suitable location. I've similarly put a radio into my luggage when going on a holiday. It might transpire that it stays there, or it might be that I happen to find a picnic table at the side of a water reservoir that happens to be in the shade and just begging to try a radio at. In other words, if you have a radio handy, you can handily use it when the opportunity comes to pass. So, what do you bring with you? If you're like Charles, you'll have a QRP radio, a Morse key, a battery and a wire antenna. Glynn has a vertical that lives in his car and the radio is bolted in. For a while I had my radio permanently mounted in my car and I suspect that will return there in the not too distant future. It was removed for a service that involved the transmission being replaced after it failed after only a 140,000 km on the clock. Thankfully a fellow amateur had a spare car we could use, but I wasn't game to drill holes for an antenna and I'm pretty sure they were pretty happy about that. The more I look at the activities that others report on, the more I have come to realise that the people who get on-air the most are the ones who have found a way to weave radio into their day-to-day life, rather than rely on specific amateur radio activities and plans. I confess that I miss sitting by a local lake making noise or finding a random car park with shade that is just begging for someone, anyone, to turn on a radio and have a go. So, how do you approach radio in your life, and how might you find ways to incorporate it into the gaps? I'm Onno VK6FLAB

Foundations of Amateur Radio As a self-proclaimed radio nerd I'm aware of the various amateur bands. Depending on your license, your familiarity will likely vary. I've never been on 6m for example, but I have a good working relationship with the 10m band. Amateur bands aside, there's plenty of other activity across the radio spectrum. It occurred to me that I've never actually stopped to take note of what specifically I can hear from my own station. Think of it as a station frequency survey. Obvious sources are AM and FM radio broadcasters. Then there's the aviation frequencies, the local control tower, arrival and departure frequencies as well as Perth airport ground on occasion. There's the ATIS, the Automatic Terminal Information Service. There was a time when I could hear various aviation non-directional beacons, or NDBs, that are near me, but many of them were switched off in 2016. I haven't yet found a current list of which of the 213 remaining navigation aids that form part of the Backup Navigation Network across Australia are still on the air. As it happens, there's currently some horrendous noise on HF with several new potential sources that I have not yet identified, a pool pump, a bank of solar panels, plasma TV, you name it. Staying with aviation, I've briefly played with Automatic Dependent Surveillance-Broadcast, better known as ADS-B, or ADSB, on 1090 MHz. If you have a PlutoSDR, I updated the dump1090 program to use Open Street Map several years ago. You can find it on my VK6FLAB GitHub page. If you want to see some very interesting visualisations for ADSB, have a look at the adsb.exposed website. Further up the frequencies are things like 2.4 and 5 GHz Wi-Fi. In a previous life, before I was an amateur, I played with Ku-band satellite frequencies in the range between 12 to 18 GHz, specifically DVB-S, or Digital Video Broadcasting - Satellite. While that's an impressive list of things, it leaves an awful lot of unexplored territory. For example, the local trains and public transit authority, the fire and emergency services, the volunteer bush fire brigades, water bombers and the like. I've not even looked at local digital services like DVB-T, that's the terrestrial standard, or the local radio version, DAB+, or Digital Audio Broadcasting. Then there's pagers, and countless marine services and channels, the ubiquitous CB frequencies and a couple of pirate ones, and global services like GPS, weather satellite and other Earth monitoring services. Note that I'm specifically highlighting things that I can hear at my station, or more precisely, should be able to hear. I'm in the process of figuring out which particular tools I need to actually have a stab at hearing and decoding things like weather satellite. I wouldn't be me if I didn't try this with my hands tied behind my back. I'm limiting myself to things I can hear using the antennas that I already have. I don't, well not at this stage, want to start building and installing more antennas, probably because in the not too distant future I plan to finally erect a replacement HF antenna, but that's a story for another day. As for now, I'm plotting noise levels using a tool called rtl_power. I'm working on figuring out what extra noise has joined my environment. I'm also starting to make a concerted effort to document specifically what I've actually heard. Not so much a continuous log, more of a one-way log if you like, some might call it a shortwave listener log. What RF sources have you heard in your shack and how many of them did you document? I'm Onno VK6FLAB

Foundations of Amateur Radio The other day I had an interesting exchange with a contest manager and it's not the first time I've had this dance. As you might know, pretty much every weekend marks at least one on-air amateur radio contest. Following rules set out by a contest the aim is to make contact or a QSO with stations, taking note of each, in a process called logging. Using logging software is one way to keep track of who you talked to, a piece of paper is another. If your station is expecting to make less than a dozen contacts per hour, paper is a perfectly valid way of keeping track, but it's likely that most contests expect you to transcribe your scribbles into electronic form. Which electronic form is normally explicitly stated in the rules for that contest. While I mention rules, you should check the rules for each contest you participate in. Rules change regularly, sometimes significantly, often subtly with little edge cases captured in updated requirements. On the software side, using electronic logging, even transcribing your paper log, can get you to unexpected results. I participated in a local contest and logged with a tool I've used before, xlog. Contests often specify that you must submit logs using something like Cabrillo or ADIF. There are contests that provide a web page where you're expected to paste or manually enter your contacts in some specific format. Using xlog I exported into each of the available formats, Cabrillo, ADIF, Tab Separated Values or TSV and a format I've never heard of, EDI. The format, according to a VHF Handbook I read, Electronic Data Interchange, was recommended by the IARU Region 1 during a meeting of the VHF/UHF/Microwave committee in Vienna in 1998 and later endorsed by the Executive Committee. The contest I participated in asked for logs in Excel, Word, ASCII text or the output of electronic logging programs. Based on that I opened up the Cabrillo file and noticed that the export was gibberish. It had entries that bore no relation to the actual contest log entries, so I set about fixing them, one line at a time, to ensure that what I was submitting was actually a true reflection of my log. So, issue number one is that xlog does not appear to export Cabrillo or ADIF properly. The TSV and EDI files appear, at least at first glance, to have the correct information, and the xlog internal file also contains the correct information. Much food for head-scratching. I'm running the latest version, so I'll dig in further when I have a moment. In any case, I received a lovely email from the contest manager who apologised for not being able to open up my submitted log because they didn't have access to anything that could open up a Cabrillo file. We exchanged a few emails and I eventually sent a Comma Separated Values, or CSV file, and my log was accepted. What I discovered was that their computer was "helping" in typical unhelpful "Clippy" style, by refusing to open up a Cabrillo file, claiming that it didn't have software installed that could read it. Which brings me to issue number two. All these files, Cabrillo, ADIF, TSV, CSV, EDI, even xlog's internal file are all text files. You can open them up in any text editor, on any platform, even Windows, which for reasons only the developers at Microsoft understand, refuses to open a text file if it has the wrong file extension. This "helpful" aspect of the platform is extended into their email service, "Outlook.com" previously called "Hotmail", which refuses to download "unknown" files, like the Cabrillo file with a ".cbr" extension. With the demise of Windows Notepad, another annoying aspect has been removed, that of line-endings. To signify the end of a line MacOS, Windows and Linux have different ideas on how to indicate that a line of text has come to an end. In Windows-land, and DOS before it, use Carriage Return followed by Linefeed. Unix, including Linux and FreeBSD use Linefeed only; OS X also uses Linefeed, but classic Macintosh used Carriage Return. In other words, if you open up a text file and it all runs into one big chunk of text, it's likely that line-endings are the cause. It also means that you, and contest managers, can rename files with data in Cabrillo, ADIF, CSV, TSV, EDI and plenty of other formats like HTML, CSS, JS, JSON, XML and KML to something ending with "TXT" and open it in their nearest text editor. If this makes you giddy, a KMZ file is actually a ZIP file with a KML file inside, which is also true for several other file formats like DOCX to name one. Of course, that doesn't fix the issues of broken exports like xlog appears to be doing, but at least it gets everyone on the same page. Word of caution. In most of these files individual characters matter. Removing an innocuous space or quote might completely corrupt the file for software that is written for that file format. So, tread carefully when you're editing. What other data wrangling issues have you come across? I'm Onno VK6FLAB

Foundations of Amateur Radio Did you know that on the 18th of April, 1925 a group of radio amateurs had a meeting in Paris? During that meeting they formed an organisation that still exists today. Before I get into that, let me share a list of names. - Wireless Institute of Australia - Radio Amateurs of Canada - Radio Society of Great Britain - Vereniging voor Experimenteel Radio Onderzoek in Nederland or if you don't speak Dutch, can't imagine why, the Association for Experimental Radio Research in the Netherlands, - Deutscher Amateur Radio Club, I'll let you figure out what that translates to, - American Radio Relay League Language aside, one of these is not like the other. Once upon a time, in a land far, far away, at a moment likely before either of us was born, Hiram, wanted to send a message from his amateur station in Hartford to a friend in Springfield. That's 26 miles, or less than half an hour up the road via I-91. One minor problem. At the time, in 1914, using amateur radio for anything beyond 20 miles or so was considered a miracle, so Hiram asked a mate at the halfway point in Windsor Locks to relay a message on his behalf. Soon after he convinced his local radio club in Hartford that building an organised network of stations to relay amateur radio messages was worth doing and the American Radio Relay League was born. Co-founded with radio experimenter Clarence Tuska, Hiram Percy Maxim became its first President. He held many callsigns, most recently W1AW. At the time, longwave, the longer the better, was considered the pinnacle of communication technology. The airwaves were becoming crowded, so amateurs, in search of more space and always up for a challenge, started experimenting at the edges. The shortest wavelength available to amateurs at the time was the 200m band, or 1,500 kHz. In December 1921 the first successful transatlantic transmissions were achieved. Hundreds of North American amateurs were heard across Europe on 200m and several were heard in reply. In a dance that continues to this day, new technology replacing old, spark gap transmitters were replaced by vacuum tubes and using those amateurs were able to use even shorter wavelengths. While technically illegal to operate on higher frequencies, the authorities put their fingers in their ears and let those crazy amateurs play on those useless bands. This is a world without international prefixes, no VK, PA or G stations, so amateurs were forced to come up with their own system to indicate the continent and country. This was clearly organised chaos at the edges of legality, in many countries amateur radio operation was actively discouraged or even illegal. Soon the same person who came up with the notion of the ARRL led the way and organised a meeting in Paris. That meeting, on the 18th of April, 1925 marks the forming of the IARU, the International Amateur Radio Union and as I said, it exists today. That date, the 18th of April is globally, well at least in the amateur radio community, uh, well, small pockets of the amateur radio community, known as World Amateur Radio Day. 2024 marks the beginning of a year of celebration for the centenary of the organisation that brought together this global rag-tag group of enthusiast experimenters that we fondly refer to as our community. The IARU theme for this year is: "A Century of Connections: Celebrating 100 years of Amateur Radio Innovation, Community, and Advocacy" and you're invited. So, what types of activities are you planning, what kind of celebration do you have in mind, and who is bringing the birthday cake? I'm Onno VK6FLAB

Foundations of Amateur Radio During the weekend I participated in a contest. Before you get all excited, it was only for a couple of hours over a few different sittings and while I had plenty of fun, of the eleven QRP, or low power, contacts I made, nine were on VHF and UHF, two were on 10m HF. Mind you, 3,200 and 3,500 km contacts are nothing to sneeze at. It has been a while since I've actually been on HF, so long that it felt like turning on a new radio and getting used to it all over again. If you're not sure what I'm describing, let me elaborate. A new radio takes a few goes to calibrate your ear and brain to learn what you can expect to hear and work. On some radios if you can hear the other station, you can work them. On others, unless they're pegging the S-meter, you've got no chance. QRP adds an extra layer of challenge. A few hours earlier I'd been discussing HF band conditions and one comment that stuck in my mind was that the bands appeared to be more quiet than normal. At the time, nobody could put a finger on why or how, but there appeared to be a general consensus that this was the case. So when I tuned to 10m, after having switched off my beacon, which I promptly forgot to turn back on for 36 hours or so, I went hunting for stations to contact. I heard a few, but their signals were very weak. Noise levels were amazing, very quiet, but stations were very low down. I thought nothing of it, given the discussion we'd just had, and persisted and as I said, I made two contacts. Since contacts were hard to come by, I started playing with another experiment I'm working on. Specifically I'm using something called USBip to connect to some USB devices across my network. The way it works is that you plug the devices, like a CAT cable and a USB sound-card into a Raspberry Pi, then using another computer, you can access those devices wirelessly as-if they're physically connected to the other computer. This is useful if you don't want to subject an expensive computer to any stray RF that might be coming in via a USB port. I've written some hot-plug support for this, so you can just connect and disconnect USB devices without needing to fiddle. You'll find the code on my github page. Given that stations were few and far between and not staying in one place, I moved to a local AM broadcast station, so I could test the USBip sound-card link and all I heard was absolute garbage audio coming from that station. I turned on another radio and it too had the same rubbish audio. After a couple of hours fiddling with RF-Gain and still not getting anywhere I started searching online for an answer. One thread, 27 posts long, seemed to describe what I was hearing. Bill N8VUL supplied the answer: "Make sure AGC is on" So, no. It wasn't, on either radio. Why it was off on both radios I will never know. It did make me start exploring again just what other settings I have access to on my radio and what they sound like. Turns out that there's not a lot to be found that has any basis in fact. There were a lot of videos showing amateurs pushing lots of buttons uttering phrases like: "Can you hear the difference?" with nothing much materially changing. The closest to something useful was a YouTube video by Doug N4HNH, called "ATT, IPO, [and] RF Gain" in which he shows some of the effects of each of those options on a Yaesu FT DX 5000. One thing I noticed is that the radio has a neat display that shows the signal path as it passes from a selected antenna through those options and more, highlighting which ones are in use. I started hunting around to see if such a block diagram exists for my FT-857d. Unfortunately I didn't manage to find any such diagram, not even for another radio. The closest I got was the image on page 30 of the FT DX 5000 Series Operating Manual. I did learn that the attenuator on my radio is 10 dB and it doesn't function on 2m and 70cm. As for the AGC, the user manual doesn't help much. It states that it's used to disable the Automatic Gain Control and normally it should be left on. There's some discussion around the interaction between the "RF Gain" knob and the AGC, but I must confess that finding useful examples of this managed to elude me. At this point I have no idea what the difference is between the block diagram on the FT DX 5000 and my FT-857d, other than the obvious single antenna port and plenty of missing features. I find it surprising that for a radio that was introduced over 20 years ago, this kind of information appears to be lacking. Especially since it would help any new amateur operate their radio better and understand the impact of each particular setting on the signal that they were hearing. If you know of any such resource, reach out, my address is [email protected] Meanwhile I'm going to spend some quality time with my radio and the manual and see what other hidden gems I can find and if you know me at all, you'll know that this isn't the first, second or even third time that I'm going through the manual of a radio that I've now owned for nearly as long as I've been an amateur. I'm Onno VK6FLAB

Foundations of Amateur Radio Whenever I'm out in the bush in the process of erecting some or other wire contraption, uh, antenna, I cannot help but think of the iconic Australian rock band, Skyhooks, not for their glam rock inspired music, nor for their pure mathematics and computer science degree holding guitarist, but for their name. In antenna erection, a skyhook is called for when you point at a spot in the sky and will into being an attachment point for the wire antenna in your hand. It's always in the perfect spot, holds any weight and of course it's made from unobtainium. Absent a skyhook, there are other ways of hoisting an antenna into the air. A recent discussion revealed that in some places catapults and trebuchets are frowned upon, if not outright illegal. Can't imagine why. Depending on their size, they may be difficult to transport. In the same vein, antenna launchers, lightly camouflaged spud guns, are essentially a gas pressurised tube, causing a projectile to be launched by releasing a valve. Those too are pretty restricted and for good reason. Fortunately there are plenty of other ways of getting things to be in the right place. Let's explore. One option is to bring along a pole, made from whatever is at hand, a multi-element fibreglass pole made by Spiderbeam, mine is 12m long, has always worked for me, though I will confess that I have managed to break one. It did take a 135 degree bend in the tip to achieve that. I'll hasten to add, I didn't set out to do that. Previously it had easily sustained 90 degree abuse in heavy wind. I purchased a new one. I've used it for years. It's not cheap, but it works. Alternatives, much less strong, are using fishing rods or much less flexible, aluminium tubes, pool cleaning extension poles, even painters poles and at a pinch, lengths of wood screwed together, or if you're a Scout, logs lashed into some contraption. Then there's using the nearby landscape. Getting a wire into a tree is an activity that's fun for young and old. Not so much for the person attempting it. Often this starts with throwing things at the tree. You might find a spanner, tie it to a rope and whirl it around, letting go at just the right moment to get it to where you're going. This is not a safe activity and not recommended away from emergency medical assistance, you've been warned. This graduates to using things like a monkey's fist knot. I was given a brightly coloured one, lovingly hand crafted by Alan VK6PWD. It's reminiscent of a Sea Scout woggle knot. Truth be told, it's too beautiful to use, or rather risk losing. Tie it to a line and whirl and throw. Then there's the arborist throw bag, same deal. Each of these whirling activities are fraught. Mainly because you need to strike a balance between the strength of the line, strong enough to be chucked, uh, thrown, but weak enough that you can break it if it gets caught and believe me, it will. There's the option of co-opting your dog's ball launcher. Tie a rope to the ball and hurl. Success depends on how quick your dog is in catching low flying tennis balls. The last time I went fishing was in 2003 when I used a string and a safety pin to catch an, admittedly, tiny fish at Harry's Hole using a tiny piece of bread, took all of 5 minutes. That said, I have a new fishing rod, well, it was new when I purchased it, but now it's a couple of years old. It was the absolute cheapest one I could find. I also bought a box of sinkers. Purchased on the advice of Bob VK6POP, I've used that rod many times to launch a sinker at a nearby tree and used it to pull through some line and then an antenna. It's still a balance between using a fishing line that's strong enough to handle the weight of a sinker and weak enough to break when you want to. The sinker needs to be just the right weight too. Too light and you'll launch it at the right branch where it will stay for the rest of the life of the tree. Too heavy and it will end up somewhere in the bush, never to be found. Grey sinkers tend to vanish in the grass, so if you can find it, look for something nice and bright, fluorescent is best. In a pinch you can use a couple of sinkers, like when you've run out, but in my experience they tend to wrap themselves around a branch. Of course you could also just climb into a tree, or hire a cherry picker, but I'm not that flexible, either in my joints or wallet, so those options don't do it for me. If you have a friendly arborist nearby, there's no shame in paying them to attach a pulley to the required branch in your backyard. Just make sure that the line you use on the pulley cannot escape the groove and get jammed between the wheel and the cheek, don't ask me how I know. So, what ways do you use to summon a skyhook and does it include a Siberian jukebox? I'm Onno VK6FLAB

Foundations of Amateur Radio So, the 19th of February 2024 came and went. As it was, my day started with the highest minimum that month, 27.5 degrees Celsius, that's the minimum overnight temperature. The maximum that day here in Perth, Western Australia was 42.3 degrees. The day before was the highest maximum for the month, 42.9. If you're not sure, that's over 109 in Daniel Gabriel Fahrenheit's scale. That same day the Australian regulator, the ACMA, launched a new era in Amateur Radio. Moving from personal amateur licenses we legally became part of a class license regime. We have the option to hand our license back and get a refund, but the cautious side of me prevailed and I've not yet handed back my license, since it's currently the only proof that my callsign is valid, the one issued to me in December 2010. I contacted the ACMA to ask about this and was told that they were having display issues with their system and was sent an image showing both my callsigns and email address. I'm not saying that I don't trust the person sending this to me, but I'm fairly sure that "but your honour, it was in an email" isn't going to cut it if push comes to shove. Curiously my name appears to be missing, showing the word "Blank" instead. Their IT team has been working on displaying F-calls for weeks now. I mean, seriously, these were first issued in 2005. Do we really need to spell this out? The ACMA continues to actively encourage amateurs to hand in their license and points out that any delay in doing so will reduce the amount that may be due. It also points at Schedule 4, Part 2 subclause (7)(1)(d) of the Radiocommunications (Amateur Stations) Class Licence 2023, to assure me that my callsign is mine and mine alone, irrespective of what's in the register. It goes on to say that the letter they sent back in January, the one they had to resend, since they got my callsign details wrong, explained that I could hand back my license and that my ability to operate hinged on my qualification, not my callsign. Here's the rub. Let's say that I'm qualified and that the letter I have proves it. I am required to identify myself on-air, the regulations say so. This means that in order for me to claim that I am who I say I am, there needs to be a register with that callsign. Apparently I'm in the register, but nobody other than the regulator can prove that. One thing that appears to be missing is a solid understanding that the register of callsigns is used by the amateur community to determine if a callsign heard on-air is assigned or not. I mean, I could call myself VK6EEN and without the register who's to say that it's mine? It's not confidence inspiring to say the least. Then there's the register itself. There's an online component, which you can use to search for a callsign. As I said, mine isn't visible, neither is any other four letter F-call. As a test, I've been scrolling, one page at a time, for the past hour, to get to VK6F, starting at VK6A, to see if it shows up, but I'm not holding my breath. For some reason the developers who built this appear incapable of rendering a simple table in anything less than 36 seconds per page, so much so that Chrome thinks that the page has crashed and offers to kill it, every time. Funnily enough, if you extract the URL from within the page and copy it, you can download all 176 pages for VK6 callsigns in less time than it took me to write this sentence. Unsurprisingly, F-calls are not there. Did I mention that this software, released a month ago, is already using depreciated features in my current web browser, which came out a week before the new register went live? It gets better. If you actually want to manage your callsign, you need to create an account on the regulator's portal, called ACMA Assist. When you load the ACMA Assist URL and click the "Sign up or log in" button, 134 different URLs from all over the Internet are hit, across 34 different domains, including Facebook, Google, Microsoft, LinkedIn, Markmonitor, Monsido, several content, font, icon and javascript libraries, and plenty more. This is a Government website, requiring that I authenticate to it, and to do that, I'm required to provide more identity documents than the tax department needs and wait for it, authentication is outsourced to some random domain, so you're entering your details into a third-party service. You have the choice of using the Government identity provider, one that requires a mobile phone and an app, or use a Government owned company that prefers a mobile and a different app, but offers access via a website on yet another domain. Now it gets funky. If you pick "driver's license", you'll discover that everything that's on your license is information that the form wants. So anyone with a photo of your license can sign up and identify as you, like the chemist who required a photocopy of it so you could buy Sudafed for your debilitating hay fever, because instead, you might use it to create methamphetamine, or the nightclub that required it so you could enter the venue because of course they do, or the telecommunications company that provided access to your details during a recent hack. Just so we're clear here. I'm now required to validate my identity to access a callsign that is already in the database, already has my email address linked to it and is for an amateur license that I already have been in possession of and paid for since 2010. Never mind that I used to email the regulator to have them issue an invoice that I paid for via credit card, no authentication at all, and that was for a personal license, issued specifically to me. We'll also ignore that if you signed up with ACMA Assist a year ago, you don't need to validate, not then, not now. Speaking of email. The ACMA has just sent me one telling me that I can request and fill in a form and email or fax it to them to update my records instead. That's interesting, but what about the privacy implications of tracking by the worlds mega corporations on a Government site or even the security theatre for something that according to the regulator isn't even my permission to operate? I'm all for giving the regulator the benefit of doubt, but if this is the future of Amateur Radio Licensing in Australia, I'm beginning to wonder just which Wild West Orwellian landscape I stepped into and I'm asking myself is this the best that our limited tax payer dollars can achieve? If you want to see this for yourself, open up your browser, press F12 and have a look at the network connection tab while you visit the ACMA Assist portal. Finally, I have one question. Why are our so-called representative bodies, the WIA and RASA, not jumping up and down about this? Apparently, I'm Onno VK6FLAB

Foundations of Amateur Radio When you operate your station portable, either for fun, or for points, you might be surprised to learn that getting on air and making noise isn't quite as simple as bringing a radio and turning it on. Aside from the need for a reliable power supply, batteries, generator, solar panels, or a magic mains socket, there is the requirement for bringing enough gear to get on air, but not so much that setting up takes days, or even hours. The decisions you make are influenced by where you decide to operate from. If you want to stay in your car, the location is not nearly as influential as when you decide to find a park where you want to have some fun. Finding a location is not a trivial process. If you only plan to get on air for an hour to activate a park, you pretty much get what you find, but if you plan to be on air during a contest for the day, other things start to come into focus. For example, what are the toilet facilities like, are we digging a hole, or is there a public facility nearby? Depending on the time of year, the temperature and weather will influence your choice. For reasons I'm still unsure about, most of the contests in Australia are in the middle of summer, so wearing long sleeves, sunscreen and a hat is the starting point for your adventure. Sitting in the midday sun for any period of time, absent a breeze is not fun, so shade becomes a requirement, not a nice to have. Mind you, at least we don't need to contend with meters of snow, well, not where I am. In other words, what works for me might not work for you. Finding locations is tricky. You can drive around, consult satellite maps, look for desirable attributes and still be rudely surprised when you get to the point of turning on your gear. One of the best lessons I learnt was operating from my car during a contest that awarded points for operating in as many different locations as possible. I used a satellite map to find a location within each boundary and then drove from point to point. If I recall, I set-up in over 30 locations across a 48 hour period. It taught me a great deal about discovering high voltage power lines on a satellite map, the impact of trains on your HF radio, the difference that geology has on your antenna and what a safe location looks like and what the typical hallmarks are for a scary one. My most recent discovery tool is a public toilet map. It's not perfect, the user interface is horrid and for some reason it needs to navigate from the Timor Sea to each toilet, but those issues aside, it does help eliminate locations that lack facilities. I am in the process of cross referencing the Parks On The Air map with the Toilet map to see if there are some nearby parks that have shade, a loo and the opportunity to park nearby to reduce the amount of lugging required for the gear we intend to bring to the next field day. So, what are your tips for finding a place to operate? What kinds of things have you learnt that influence what choices you make? Before I go, one pro-tip. Keep a record of where you actually operate and whilst you're at it, what you used, and not. You can thank me later. I'm Onno VK6FLAB