Edison Motors

Chace, Theron, and Jordan share major updates from the shop and the test track.Big D is putting kilometres down, welcoming truck-driver test rides, and earning strong feedback for its ride quality, quiet cab, and front air-ride “load share” suspension. The team explains why the mechanical truck matters alongside Edison’s hybrid program, and how real-world testing is shaping the next generation of trucks.They also unpack Edison’s near-term build plan: two hybrid trucks and one mechanical truck next, followed by a small validation production run designed to refine manufacturing before scaling. Plus: Environment Canada approval for Cummins X15 hybrid trucks, updates on the new shop’s power and internet, facility tours, Investor Day, potential Australian expansion, and a few classic live-stream technical difficulties.From heavy-haul truck engineering to production strategy, this episode is an unfiltered look at what Edison Motors is building next.

After a crazy few months on the road, the crew is back in the shop and a lot has happened. In this episode we break down the supply chain trips to China and the U.S., axle testing drama in Detroit, and where we are on getting trucks ready for real production.We unveil “Big D,” the newly almost finished Royal winch tractor, talk through why we’re refusing pre-orders, and lay out the step‑by‑step plan for a validation production run of mechanicals and hybrids before scaling up. You’ll hear how we’re approaching apples‑to‑apples testing between hybrid and mechanical trucks, what it actually costs in hours to build one, and why we’re simplifying future builds with more analog wiring and common off‑the‑shelf parts.On the lighter side, we recap the NATO/Canadian military show in CANSEC, our first defense contract, sitting in fighter jets, firing simulated missiles, and almost towing a jet with the hybrid pickup. Then we get into this year’s Edison EV Go‑Kart Challenge: record turnout, insane student builds sending 5–6 feet of air, teachers turning the new shop into a donut arena, and why we’re finally opening an adult league to help sponsor more school teams.We also cover Investor Day at the new shop, concrete pour and facility upgrades, pickup conversion kit updates, and how we’re thinking about certification, chassis “skateboards,” and open sourcing wiring and CAN info. If you want a candid look at what it’s actually like to grow a Canadian truck manufacturer from prototype chaos into real production, while still having a bonfire with fans at the end of the day, this episode is for you.For information on investing in Edison Motors, visit:https://edisonmotors.ca/investors

Chase brings in MLA and former trucker Harman Bhangu to break down how the “driver shortage” is really a pay shortage, supercharged by the abuse of Canada’s Temporary Foreign Worker Program. They unpack how some carriers are charging migrants tens of thousands to come to Canada, trapping them in debt and closed work permits that amount to modern indentured servitude, while honest companies trying to pay fair wages get undercut and pushed out of the market. Harman explains why wages have stagnated, why families are choosing warehouses over the highway, and how Victoria’s out‑of‑touch policies are hollowing out the industry that keeps B.C.’s shelves stocked. From rallies and shop‑floor conversations to his jump into politics, he lays out what needs to change so trucking can be a respected, well‑paid career again instead of a race to the bottom.

Chase sits down with BC Green Party leader Emily Lowan to dig into how Canada’s Temporary Foreign Worker Program has become, in the UN’s own words, a “breeding ground for modern-day slavery.” They break down how closed work permits trap migrant truck drivers in indentured servitude, why fines against abusive carriers are meaningless, and how corporations use anti-immigrant rhetoric to keep workers fighting each other instead of the oligopolies driving wages down. Emily lays out concrete fixes, from ending closed permits and funding real enforcement, to large-scale regularization and permanent residency, while Chase connects it all back to what truckers lived through during Covid, the convoy, and the collapse of rest stops, showers, and basic dignity on the road. If you care about trucking, immigration, or the working class getting a fair shot, this is a conversation about possible ways to fight back together instead of buying the culture war spin.

ConExpo might not have gotten the Edison truck, but it definitely got the full Edison Motors experience. In this episode, the crew breaks down how a simple trip to ConExpo Vegas turned into a masterclass in government red tape, border headaches, and creative problem solving when Environment Canada and the EPA blocked their hybrid truck and Border Security even blocked the axles from crossing the border. Instead of backing down, they built a booth around a brutally honest sign calling out “stupid government rules,” connected with fans, and turned a logistical disaster into one of the most talked about exhibits on the floor.The conversation goes deep into the design and purpose of a hybrid Texas bed winch tractor, explaining how this specialized oilfield truck can load its own 400‑barrel tanks, move rig mats, and stand tank farms while running fully electric on site to slash idle time and fuel burn. They lay out their plan to build two nearly identical trucks, one mechanical and one hybrid, to capture real world fuel savings data instead of just “math on paper,” making this episode a goldmine for anyone into heavy equipment, oilfield operations, or sustainable work trucks.Along the way, the guys share behind the scenes stories from the show floor, from being featured in multiple OEM and supplier booths to the infamous bare‑ass radiator photo prank that almost ended up on a giant trade show banner. It’s an unfiltered look at trade‑show politics, marketing that actually gets attention, and the reality of trying to push innovative hybrid truck technology through layers of bureaucracy. If you’re into diesel hybrids, heavy haul, oilfield trucks, Texas bed rigs, government overreach, or just chaotic small company hustle, this episode is packed with searchable keywords and stories that will keep fans and new listeners hooked.

Chase and the crew fire up the mics after a break to unload a ton of updates: delivering their first semi to Ontario (and what broke), winter EV battery headaches, undisclosed customer projects, Land Cruiser hybrid test results, ConExpo troubles, warehouse demolition, go-kart challenge plans, investor day camping chaos, and where the Royal winch tractor build is really at behind the scenes.

This episode of the Edison Motors Podcast dives into the wild mix of building electric and hybrid trucks, fighting holiday shutdowns, and trying not to die on cheap mountain sleds in deep Golden, BC snow. Hear how the team is racing to finish the next winch tractor for CONEXPO in Vegas, lining up a road trip to CanSec in Ottawa, and scrambling around supplier delays, warped axle mounts, and wrong‑way parts that don’t fit until the last bolt proves them wrong.​Chase, Yale, Jordan and Theron break down where the flagship electric truck build is really at, what went wrong with the Cummins X15 timing, and why welding distortion on the axle mounts turned into a full‑blown Christmas frustration video on YouTube. They talk about meeting rig‑up partners like Marsep and Peerless, why only two production bays changes everything, and how the plan is to build two identical hybrid trucks side by side instead of reinventing the wheel twice.​On the hybrid side, Yale explains the complete redesign to the V4 hybrid platform: new battery system, integrated BMS, safer contactors inside the packs, fewer batteries (from six down to two), less weight, better packaging, and about thirty percent more horsepower out of the system while integrating motor controllers into the axles to cut EMI and simplify wiring. The crew also talks about new hires on the mechanical and electrical engineering teams and how getting the mechanical truck engineering done frees everyone to focus on the Royal hybrid and the Tolko logging truck hybrid builds.​The guys explain why the old shop is getting torn down, how they scored a used CAT log loader for around seventy grand and put roughly thirty thousand into undercarriage and hydraulic work to handle demolition themselves, and how glulam beams and steel from the teardown will be repurposed into new offices, a proper merch store, and a media space.​The episode also hits real‑world trucking life: holiday shutdowns in parts supply, engineers off while mechanics are still wrenching, waiting on cab mounts, axle mounts and critical components through the Christmas lull, and the headaches of rig‑up coordination when a mechanic drives all the way to Winnipeg without the parts he was supposed to bring. They talk about launching the Edison service truck as a mobile repair unit across the scales from the inspection station, how mechanics can use their “week off” for premium mobile work, and why field service is the best way to force engineers to experience what their designs are like to fix at night in the snow under a truck.​Of course, it wouldn’t be Edison Motors without some chaos: deep snow around the property, a DIY toboggan/GT track off the front door, night sledding with the kids, and Chase and Yale learning the hard way how not to reverse a sled in powder and why rolling the sled is sometimes the only way out. There are stories of GT injuries, sketchy ten‑foot drops onto flats, and plans to groom the test track, drag an old truck box liner behind a sled to make cross‑country loops, and even build ski jumps on site.​The crew also rants about winter driving in British Columbia: DriveBC not having a proper app, repeated Rogers Pass closures, avalanche control, idiots running four‑way flashers in every snowflake, and the real danger of hazard light fatigue or when you actually come across a broken‑down fuel truck with no lights on a steep mountain highway. Mixed in are candid shop stories about forgetting parts, turning around with critical pieces, and needing to tighten up processes as Edison scales from prototype chaos to a repeatable production operation.​If you care about electric trucks, hybrid logging rigs, real blue‑collar engineering, and what it’s actually like to build a truck company in a snowy corner of British Columbia, this Edison Motors Podcast episode is packed with updates and stories straight from the shop floor and the sled trail.

Rich DeBoss joins the Edison Motors crew to tell the full, unfiltered story behind stuffing semi‑truck parts into a Land Cruiser, towing a loaded Kenworth on a “closed course,” ripping bumpers off, and surviving third‑party testing that tried to break their hybrid. From cardboard‑aided design to dyno runs that shredded rubber and impressed the test facility, Rich explains why electric axles, batteries, and open‑source control make this little LC hit like a 3406 Cat while terrifying tires, test drivers, and engineers alike.

The crew sits down with longtime supporter and first YouTube channel member Brian Fleming to talk about life hauling massive Australian road trains, working in Darwin, and how trucking in the outback compares to running rigs in Canada. The conversation dives into what it takes to keep heavy trucks moving in extreme conditions, from brutal heat and dust to the reality of maintaining equipment thousands of kilometres from major cities.​They also get into Chase’s recent trip to China, visiting factories and suppliers to look at components for Edison’s hybrid-electric trucks, and what modern Chinese truck stops, battery-swap stations, and EV infrastructure actually look like on the ground. Along the way they trade stories from -40°C Canadian winters, frozen beards, deep snow, and why small-town mountain life is the perfect backdrop for designing and testing next-generation hybrid and electric semi trucks.​If you’re into heavy-duty trucking, electric semis, road trains, off-grid hauling, or just want a behind-the-scenes look at how Edison Motors is trying to rethink diesel trucks with electric drive systems, this episode is packed with real-world experience and shop-floor storytelling.

In this episode, we dive deep into the latest updates from our shop floor, covering the delivery of our first hybrid-electric truck to Winnipeg, the challenges of Manitoba’s permit system, and real-world testing adventures. Learn how Edison Motors is pushing the boundaries of electric vehicle innovation, from advanced wiring harnesses to custom body rigging and rigorous compliance testing. Whether you’re passionate about electric trucks, hybrid conversions, or the future of sustainable transportation, this episode delivers insights, candid industry talk, and behind-the-scenes stories you won’t find anywhere else.Join us as we explore the realities of building and testing electric trucks in Canada, discuss the impact of government regulations, and share tips for anyone interested in electric vehicle conversions. Hear firsthand accounts from our team about the technical hurdles, creative solutions, and the importance of community support in driving innovation forward. We also cover the latest developments in electric truck technology, including the integration of Arcadia wiring harnesses, braking performance, and the ongoing journey to make Canadian manufacturing more sustainable.Invest in Edison Motors:https://edisonmotors.ca/investors/